ATTACHING THE FRONT COVER
The speaker and the front cover are packed separately. To attach the front cover, line up the four salients (magnet) on the reverse side of the front cover with the four corresponding pegs.
Notes
•When the cover is not attached, take care not to touch the speaker units with your hands or to exert excessive force with tools.
•There are magnets on the reverse side of the front cover. Do not place the front cover close to objects that might be affected by magnets, such as TVs, clocks, magnetic cards, diskettes etc. when you don’t attach it.
ABOUT THE PORT PLUG
The port on the back of this unit has a port plug to adjust the bass level. When you want to increase the bass level, detach the port plug.
Rear side
Port plug
Port
Bass range characteristics:
without port plug
dB
with port plug
50 | 200 300 | Hz |
SPECIFICATIONS | |
Type .................................. |
|
|
|
Driver.......................................... | 16 cm |
| 3 cm |
Impedance ........................................................................ | 6 Ω |
Frequency response ...................... | 45 Hz to 50 kHz (– 10 dB) |
| to 100 kHz (– 30 dB) |
Nominal input power ....................................................... | 30 W |
Maximum input power | ...................................................120 W |
Sensitivity ....................................................... | 88 dB/2.83 V/m |
Crossover frequency ...................................................... | 3 kHz |
Dimensions (W x H x D) | |
Including terminals................................ | 220 x 380 x 353 mm |
|
|
Speaker cabinet.................................... | 220 x 380 x 329 mm |
|
|
Weight .......................................................... | 9.7 kg (21.4 lbs.) |
•Specifications are subject to change without notice due to product improvements.
•Care should be taken not to exceed the input power values noted above.
•A speaker cable is not included with this model.
Taking care of the speaker
When you wipe this unit, do not use chemical solvents (ex. alcohol or thinners etc.); this might damage the finish. Use a clean, dry cloth. For heavy dirt, dampen a soft cloth in detergent diluted with the water, wring it out, and then clean this unit up with the cloth.
English