■Connecting the AM loop antenna
1Set up the AM loop antenna.
2Press and hold the tab to insert the AM loop antenna lead wires into the AM ANT and GND terminals.
2
1
3
3Orient the AM loop antenna for the best reception.
CONNECTIONS
■Connecting the indoor FM antenna
Insert the rectangular end of the indoor FM antenna into the FM ANT terminal.
FM ANT GND AM ANT
75Ω UNBAL
Indoor FM antenna
Notes
•A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas.
•If you connect an outdoor FM antenna to this unit, do not connect the indoor FM antenna to this unit.
■Connecting the outdoor FM antenna
If this unit is installed inside a steel building or at a great distance from the transmitter, it may be necessary to install an outside long wire antenna.
Use a
Antenna adapter | FM ANT GND AM ANT |
(included for |
|
U.S.A. and Canada | 75Ω UNBAL |
models only) |
|
SETUP
Notes
•The AM loop antenna should be placed away from this unit.
•A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. It is recommended that you should connect a 5 to 10 m (16.4 to 32.8 ft) of vinyl- covered wire to the AM ANT terminal and extend it outdoors from a window. Consult the nearest authorized YAMAHA dealer or service center for more details about outdoor antennas.
•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.
7