●Before making any connections, switch OFF the power to this unit and the amplifier or other component.
●Be sure that the connections from the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) input terminals of the amplifier or other component.
●If you have a YAMAHA amplifier whose terminals on the rear panel are numbered as 1, 2, 3, etc., connections can be made easily by making sure to connect the LINE OUT terminals of this unit to the input terminals of the amplifier numbered 2.
Amplifier
TUNER
L
R
Connection cord (included)
This unit
FM ANT GND AM ANT | LINE OUT |
75Ω UNBAL.
R L
2
To AC outlet
This unit has a remote control sensor. It receives signals from a remote control transmitter provided with a YAMAHA amplifier.
Remote control sensor
Within approximately 6 m (19.7 feet)
30° | 30° |
|
Notes
●There should be no large obstacles between the remote control transmitter and the main unit.
●If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting.
6