Yamaha TYROS - page 112

Style Playback (Auto Accompaniment)

Reference

112 TYROS Owner’s Manual

110

Style Playback Related Settings

The TYROS has a variety of style playback functions, including Split Point and many others — which can be accessed by pressing

[FUNCTION] → STYLE SETTING/SPLIT POINT.

■ Split Point....................................................................................................................................

These are the settings (there are two Split Points) that separate the different sections of the keyboard: the

Chord section, the LEFT part section and the RIGHT 1-3 section. The two Split Point settings (below)

are speciﬁed as note names.

•Split Point (S) — separates the Chord section for style playback from the section(s) for playing

voices (RIGHT 1-3, LEFT)

•Split Point (L) — separates the two sections for playing voices, LEFT and RIGHT 1-3.

These two settings can be set to the same note (as in the default) or two diffferent notes as desired.

Split Point (L) cannot be set lower than Split Point (S), and Split Point (S) cannot be set higher than Split

Point (L).

■ Stop Accompaniment........................................................................................................................

When auto accompaniment is turned on and Syncro Start is off, you can play chords in the

left-hand (accompaniment) section of the keyboard with the style stopped, and still hear

the accompaniment chord. In this condition — called “Stop Accompaniment” — any

valid chord ﬁngerings are recognized and the chord root/type are shown in the LCD.

Since the TYROS properly recognizes the chord, you can also use the Chord Match func-

tion (page 38) with the Multi Pads or the Harmony effect (page 39) without having to play

back a style.

From the display above, you can determine whether the chord played in the chord section

will sound or not in the Stop Accompaniment status.

• OFF..................................The chord played in the chord section will not sound.

• STYLE.............................The chord played in the chord section will sound via the voices for the

Pad part and the Bass channel of the selected style.

• FIXED............................. The chord played in the chord section will sound via the certain voice

regardless of the selected style.

LP FUNCTION SOU

CRE

Parameters Split Point settings

Split Point (S+L)

●Setting the Split Point (S) and the Split Point (L)

to the same note

●Setting the Split Point (S) and the Split Point (L)

to different notes

Split Point (S) Split Point (L)

Chord section

+ Voice LEFT

Voice RIGHT1 - 3 Chord section Voice LEFT Voice RIGHT1 - 3

Press the [S+L] LCD button and rotate the [DATA

ENTRY] dial, or press the desired key on the keyboard

while holding the [S+L] LCD button.

To set Split Point (L), press the [L] LCD button and rotate the

[DATA ENTRY] dial, or press the desired key on the keyboard

while holding the [L] LCD button.

To set Split Point (S), press the [S] LCD button and rotate the

[DATA ENTRY] dial, or press the desired key on the keyboard

while holding the [S] LCD button.

• The chord detected by playing the

Stop Accompaniment can be

recorded to a song regardless of

the setting here. Please note that

the voice sound will be recorded

when set to “STYLE,” and will not

be recorded when set to “OFF” or

“FIXED.”