Using a Microphone
Reference
132 TYROS Owner’s Manual
130
Talk Setting
This function is ideal for making announcements between your singing performances. When singing a song, several effects such
as reverb, delay and vocal harmony are usually assigned to the MIC Setup. When speaking to your audience, however, these
effects may sound disturbing or unnatural. Whenever the [TALK] button is turned on, Delay and Vocal Harmony effects turn off
and the amount of reverb lowers automatically. Talk settings can be customized as well, allowing you to add any desired effects
to your voice as you speak to your audience. Turning the [TALK] button off automatically recalls the MIC Setup for singing again.
Talk Setting Parameters
Microphone Overall Settings
■ 3BAND EQ
EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can be boosted or cut as
required to tailor the overall frequency response. The TYROS features a high grade three-band digital equalizer function
for the microphone sound.
● Hz...............Adjusts the center frequency of the corresponding band.
● dB...............Boosts or cuts the level of the corresponding band by up to 12 dB.
VOLUME This determines the output volume of the microphone sound.
PAN This sets the stereo pan position of the microphone sound.
REVERB DEPTH These set the depth of the reverb effects applied to the microphone sound.
CHORUS DEPTH These set the depth of the chorus effects applied to the microphone sound.
TOTAL VOLUME ATTENUATOR
This determines the amount of attenuation to be applied to the overall
sound (excepting the microphone input) — allowing you to effectively ad-
just the balance between your voice and the overall instrument sound.
DSP MIC ON/OFF This turns the DSP effect applied to the microphone sound ON or OFF.
DSP MIC TYPE This selects the type of DSP effect to be applied to the microphone sound.
DSP MIC DEPTH This sets the depth of the DSP effect applied to the microphone sound.
MIC
SETTING
TALK EFFECT
VOCAL
HARMONY
MIC
TALK EFFECT
VOCAL
HARMONY
MIC
• The settings on the Talk Setting
display can be saved to the User
or Disk drive on the [FUNCTION]
→
UTILITY
→
SYSTEM SETUP
display as a System Setup file
(page 65)
Select a menu.
If necessary, use the [BACK]/
[NEXT] buttons to call up the Talk
Setting display.
Press the [MIC SETTING]
button.
For singing For talking
Settings in the Talk Settings display
are automatically saved to Flash
ROM when you exit from the dis-
play. However, if you turn the
power off without exiting from this
display, the settings will be lost.
A
B
C
D
E
F
G
H
I
J
MIC
SETTING
Select the row at which
the desired parameters
are located by pressing
the corresponding LCD
button.
Press the [MIC SET-
TING] button.
Set each parameter.
If necessary, press the
[BACK]/[NEXT] button to
call up the Microphone
Overall Settings display.
Settings in the Microphone
Overall Settings display are
automatically saved to Flash
ROM when you exit from the
display. However, if you turn
the power off without exiting
from this display, the settings
will be lost.