CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

English

1

To ensure the finest performance, please read this manual

 

carefully. Keep it in a safe place for future reference.

2

Install your unit in a cool, dry, clean place – away from

 

windows, heat sources, and too much vibration, dust,

 

moisture or cold. Avoid sources of hum (transformers,

 

motors). To prevent fire or electrical shock, do not expose

 

to rain or water.

3

Do not operate the unit upside-down. It may overheat,

 

possibly causing damage.

4

Never open the cabinet. If a foreign object drops into the

 

unit, contact your dealer.

5

This player should not be placed on appliances, such as

 

amplifiers, that produce heat, or placed in a cabinet that

 

impedes the flow or air. This may result in a failure in this

 

player. Install the player in a well ventilated place. In

 

addition, do not place objects on the player.

6

Do not use force on switches, knobs or cords. When

WARNING

To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

DANGER

Invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

 

moving the set, first turn the unit off. Then gently

 

disconnect the power plug and the cords connecting to

 

other equipment. Never pull the cord itself.

7

Do not attempt to clean the unit with chemical solvents;

 

this might damage the finish. Use a clean, dry cloth.

8

Be sure to read the “TROUBLESHOOTING” section on

 

common operating errors before concluding that your unit

CLASS 1 LASER PRODUCT

This compact disc player is classified as a CLASS 1 LASER product.

The CLASS 1 LASER PRODUCT label is located on the rear exterior. (China model only)

 

is faulty.

9

To prevent lightning damage, unplug the power cord and

 

remove the antenna cable during electrical storms.

10

The generated digital signals may interfere with other

 

equipment such as tuners or receivers. Move the system

 

farther away from such equipment if interference is

 

observed.

11

Voltage selector (General model only)

 

The voltage selector (on the rear panel of this unit)

 

must be correctly set to the voltage used locally

 

before making any connection to the AC power

 

supply.

The unit is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the unit itself is turned off.

NOTE:

Please check the copyright laws in your country before recording from records, compact discs, radio, etc. Recording of copyrighted material may infringe copyright laws.

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

CAUTION

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

Laser Diode Properties

•Material: GaAlAs

•Wavelength: 780nm

•Emission Duration: continuous

•Laser Output: max. 44.6µW*

*This output is the value measured at a distance of about 200mm from the objective lens surface on the Optical Pick- up Block.

CAUTION FOR CARRYING THIS UNIT

Be sure not to carry or tip the unit with discs remaining in it.

CAUTION FOR MOVING THIS UNIT

When moving this unit, first remove all discs from the disc tray and close the tray by pressing the OPEN/CLOSE button, and then switch off the power after you confirm that the display indicates as follows.

DISC MUSIC

Never switch off the power if the display is not pictured as above, otherwise the unit will break down during moving because the internal mechanism is not locked.

3