Yamaha VCD-100K BASIC OPERATIONS, Loading discs and starting disc play, To stop play, Exchanging discs while playing another disc, STOP, RETURN

This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use the same named buttons on the front panel.

BASIC OPERATIONS

Loading discs and starting disc play				2, 3				PROG
						OPEN/CLOSE
					KARAOKE		MPX	CANCEL
		NATURAL SOUND VIDEO CD CHANGER VCD I00K			1	2	3	ENTER
		5–Disc Carouse			4	5	6
		Digital Echo / 11 Step Key C
					7	8	9	0
1		MPX KARAOKE
	POWER
		ENTER 1	2		INDEX		DISC SKIP
					PREV SKIP NEXT		SEARCH
				STOP/	KEY
					CONTROL				4
				RETURN		STOP	PLAY/REPEAT
					RETURN		SELECT
1 Turn the power on.		POWER		4 Start a disc play.

PLAY/REPEAT

SELECT

2 Open the disc tray and load discs.	Play will begin from the first track of Disc 1 automatically.
	* If you want to play a desired track on another disc, see
	the next page.
OPEN/CLOSE
Label side	To stop play
upward.
	STOP
	RETURN

Disc tray

English

3 Close the disc tray.

This unit stops at the begining of the first track on the disc.

Note

If the STOP/RETURN button is not pressed (except when

OPEN/CLOSE

“KARAOKE” is illuminated on the display), play will not stop until the last track on the last-numbered disc has been played.

Exchanging discs while playing another disc

During play, you can open the disc tray by pressing the PLAYXCHANGE button without interrupting disc play. In this case, pressing the DISC SKIP button has no effect.

Note

Additionally, you can close the disc tray by the following ways. If the tray is closed by these ways, play will begin automatically.

●Press the PLAY/SELECT button. (Play will begin from the first track of Disc 1.)

●Press a numeric button, and then press the PLAY/SELECT button or the ENTER button.

●Press the front edge of the disc tray gently. (Play will begin from the first track of Disc 1.)

9