Before Playing the Instrument

About the Bridge

 

G

D

A

E

: violin

The instrument is shipped from the factory with its

 

C

G

D

A

: viola

bridge properly set and aligned on the instrument’s

 

 

 

 

 

 

top.

 

Groove

 

 

 

After confirming that the bridge is in proper align-

 

 

 

 

4th string

 

 

 

 

1st string

 

 

 

 

 

ment, tune the instrument.

Body top

• Four notches in the bridge provide proper spacing between the strings.

Make sure that each string is set in its correspond- [Looking from the tailpiece] ing groove as shown in the illustration right.

Make sure that the side of the bridge facing the tailpiece is standing at a right angle to the top of the instrument. If the bridge is leaning either direction, place the instrument on a stable surface, slightly loosen the strings then using both hands, gently adjust the bridge’s angle. Make sure that the strings do not come out of their notches.

*Playing with a poorly aligned bridge can result in poor sound quality, and deformation or damage to the bridge.

Correct

BadBad

Right Angle

The side of the bridge facing the tailpiece should be at a right angle to the body of the instrument.

Tuning

• The strings are tuned to the following pitches;

On the violin, the 1st string is tuned to E, the 2nd string to A, the 3rd string to D, and the 4th string to G.

On the viola, the 1st string is tuned to A, the 2nd string to D, the 3rd string to G, and the 4th string to C.

Use a piano, tuning fork, tuner, etc., and adjust the pitch of each string using the tuning pegs or adjuster. When rotating the peg, ap- ply firm pressure towards the head stock.

• After tuning is complete, make sure that the tailpiece side of the bridge is still properly aligned. If the bridge is leaning in either di- rection, slightly loosen the strings and carefully re-align the bridge using both hands.

4

Page 4
Image 4
Yamaha Violin/Viola owner manual Before Playing the Instrument, About the Bridge, Tuning