Yamaha 006IPTO-F0, WD83390

110 Chapter 9—Input & Output Patching

DM1000 Version 2—Owner’s Manual

Input Patching from the Display

1 Press the DISPLAY ACCESS [INPUT PATCH] button repeatedly until the In

Patch | In Patch page appears.

Inputs and slot channels that are currently assigned to Input Channels are shown in the

parameter boxes (1) below the channel numbers. The parameter indicators are explained

below:

2Move the cursor to an input patch parameter you wish to change, and rotate

the Parameter wheel or press the [INC]/[DEC] buttons to modify the patch-

ing.

The long name of the currently-selected channel is

indicated in the upper-right corner of the screen (1).

Below the channel name is the long name of the

selected input/slot channel (2). (See page 79 and 265

for more information on changing channel names.)

3 Press [ENTER] to conﬁrm the change.

Parameter values Description

–No assignment

AD1–AD16 INPUT connectors 1–16

OMN1–OMN4 OMNI IN connectors 1–4

S1-1–S116 Channels 1–16 of Slot 1

S2-1–S216 Channels 1–16 of Slot 2

FX1-1–FX1-8 Outputs 1–8 of Internal Effects Processor 1

FX2-1–FX2-2 Outputs 1 & 2 of Internal Effects Processor 2

FX3-1–FX3-2 Outputs 1 & 2 of Internal Effects Processor 3

FX4-1–FX4-2 Outputs 1 & 2 of Internal Effects Processor 4

2D1L & 2D1R 2TR DIGITAL IN 1 (L/R)

2D2L & 2D2R 2TR DIGITAL IN 2 (L/R)

BUS1–8 Bus 1–8 Outputs

AUX1–8 Aux 1–8 Outputs

Tip:

•You can patch an input signal to multiple Input Channels.

•You can store the Input Patch settings to the Input Patch library. Refer to Chapter 15 “Librar-

ies” on page 173 for more information.

•The number of outputs of internal Effects processor 1 varies depending on the selected effect

program. (See page 155 for more information on effect programs.)