Input and Output Patching 51
DM1000 Version 2—Owner’s Manual
4
Connections and Setup
• SURR XXX
(“XXX” is a channel name)...............Surround Monitor Outs
•CR-L/CR-R...........................................Control Room Monitor signals
•CAS BUS1–BUS8................................ Bus 1–8 Cascade Outs
•CAS AUX1–AUX8...............................Aux Send 1–8 Cascade Outs
•CAS ST-L/ST-R....................................Stereo Bus Cascade Outs
•CASSOLOL/CASSOLOR................... Solo Bus Cascade Outs
•SOLO-L/SOLO-R................................Solo sig nals
• M.MX XXX
(“XXX” is a channel name.)..............Surround Monitor Outs
2 Use the cursor buttons to move the cursor to a patch parameter (1) you
wish to change, and rotate the Parameter wheel or press the [INC]/[DEC]
buttons to modify the patching.
3 Press [ENTER] to confirm the change.
Tip: To restore the default patching, recall Output Patch memory #00 (see page 177).