Setting Aux Send Levels 99
DM1000 Version 2—Owner’s Manual
8
Aux Sends
Setting Send Levels from the Display
You can view multiple channels’ Aux Send levels on the screen and adjust them individually.
1 Press the AUX SELECT [AUX 1]–[AUX 8] buttons to select the Aux Sends.
2 Press the AUX SELECT [DISPLAY] button repeatedly until the page listed
below that contains the desired channels appears.
-Send1-32 page
This page displays the Aux Send levels of Input Channels 1–32.
-Send33-48 page
This page displays the Aux Send levels of Input Channels 33–48.
The parameters on these two pages (and the procedure for setting them) are the same.
•Aux Send rotary controls
These controls adjust the Aux Send level of the Input Channels. The current numeric levels
appear below the rotary controls.
•PRE/POST
These buttons enable you to specify the Aux Sends signal source points. The PRE buttons
send pre-fader signals, and the POST buttons send post-fader signals.
•MODE
Aux Sends have two operating modes that determine how signals are sent: Fixed (Aux Send
levels are fixed); and Variable (Aux Send levels are variable).
•GLOBAL
The GLOBAL PRE and POST buttons enable you to set all Input Channels for the selected
Aux Send to pre-fader or post-fader simultaneously.
•PRE POINT
The PRE POINT PRE ON and POST ON buttons enable you to set the pre-fader channels
to pre-on (before the [ON] button) or post-on (after the [ON] button).
Note: In Fixed mode, Aux Send ON/OFF buttons appear instead of the Aux Send rotary con-
trols, PRE/POST buttons, GLOBAL PRE/POST buttons, and PRE POINT PRE ON/POST
ON. These ON/OFF buttons turn on or off each Input Channel for the currently-selected Aux
Send.