Yamaha WF41880 14 , MONITOR/REMOTE PIN layout

14 XM4180/XM4080/XH200 Owner’s Manual

●XH200

* These speciﬁcations apply to rated power supplies of 120V, 230V and 240V.

0 dBu=0.775 Vrms, Half Power=1/2 Output Power (3 dB below rated power)

Speciﬁcations and descriptions in this owner’s manual are for information pur-

poses only.

Yamaha Corp. reserves the right to change or modify products or speciﬁca-

tions at any time without prior notice. Since speciﬁcations, equipment or

options may not be the same in every locale, please check with your Yamaha

dealer.

European models

Purchaser/User Information speciﬁed in EN55103-1 and EN55103-2.

Inrush Current: 25A

Conforms to Environments: E1, E2, E3 and E4

■MONITOR/REMOTE PIN layout

Output Power* 40 Hz–20 kHz

THD+N= 0.1 %

70 V, RL=25 ΩMIN 200 W x 2

100 V, RL=50 Ω200 W x 2

Power Consumption Standby 5 W

Idle 40 W

1/8 (70 V, RL=25 Ω/Pink noise)

400 W

THD+N 40 Hz–20 kHz, Half Power MAX 0.1 %

Intermodulation Distortion 60 Hz:7 kHz, 4:1, Half Power MAX 0.1 %

Frequency Response Po=1 W, HPF=40 Hz,

80 Hz–20 kHz

MAX 0 dB

TYP 0 dB

MIN -0.5 dB

SN Ratio (DIN AUDIO) MIN 103 dB

Channel Separation Half Power, 1 kHz, Att. max, input 600 Ω shunt MIN 60 dB

Residual Noise Att. min, (DIN AUDIO) MAX -65 dBu

Input Sensitivity Att. max TYP +4 dBu

Voltage Gain Att. max TYP 38 dB (100 V), 35 dB (70 V)

Maximum Input Voltage MIN +22 dBu

Input Impedance TYP 20 kΩ (balanced), 10 kΩ (unbalanced)

Controls Front Panel POWER switch (push on/push off)

attenuator (31 position) x 2

Rear Panel OUTPUT VOLTAGE switch (100 V/70 V) x 1

HPF switch (40 Hz/80 Hz 12 dB/oct) x 2

Connectors INPUT Euroblock connector (balanced) /ch

SPEAKERS Barrier strip/ch

MONITOR/REMOTE Dsub 15P x 1

Indicators POWER/STANDBY x 1 (Green/Orange)

SIGNAL x 2 (Green)

CLIP/LIMIT x 2 (Red)

PROTECT/MUTE x 1 (Red)

Load Protection POWER switch on/off mute

DC-fault: output relay off/restored automatically.

Clip limiting : THD ≥ 0.5 %

Ampliﬁer Protection Thermal: Cuts the output (when heatsink temp. ≥ 90 °C);

operation restored automatically.

VI limiter (RL ≤ 16 Ω): Limits the output.

Power Supply Protection Thermal: Power supply shutdown (when temp. ≥ 90 °C);

operation not restored automatically.

Cooling Variable-speed fan x 1

Dimensions (W x H x D) 480 x 88 x 412 mm

Weight 9.8 kg

Included Accessories Power cord, Security cover, Owner’s Manual,

3-pin Euroblock connector x 2

No.

Signal Description

XM4180/XM4080 XH200

1 GND

2 REMOTE CONTROL STANDBY STANDBY STANDBY Control: Supply 5 VDC, 5 mADC

3 MONITOR MODEL ID MODEL ID XM4180: 560 Ω, XM4080: 680 Ω, XH200: 820 Ω (Impedance to GND)

4 REMOTE CONTROL MUTE CH D – MUTE Control: Connect to GND, +5 V, 1 mA

5 MUTE CH C MUTE CH B

6 MUTE CH B –

7 MUTE CH A MUTE CH A

8 MONITOR PROTECT STATUS CH D – PROTECTION Off/ Output On: +5 VDC, Zo=270 Ω

PROTECTION On/ Output Off: 0 VDC, Zo=High

9PROTECT STATUS CH C PROTECT STATUS CH B

10 PROTECT STATUS CH B –

11 PROTECT STATUS CH A PROTECT STATUS CH A

12 OUTPUT LEVEL CH D – XM4180, XM4080

+4dBu (-27.2 dB of Speaker Output Level) at 100 W/8Ω, RL=7.5 kΩ, Zo=300 Ω

XH200

-33.2 dB of Speaker Output Level, RL=7.5 kΩ, Zo=300 Ω

13 OUTPUT LEVEL CH C OUTPUT LEVEL CH B

14 OUTPUT LEVEL CH B –

15 OUTPUT LEVEL CH A OUTPUT LEVEL CH A