XMV4280/XMV4140 Owner’s Manual
22
Initializing the Internal Memory
Execute the following procedure when you want to return the internal memory settings to their factory-
set state, such as when the amplifier has been moved to a different location.
To initialize the internal memory, power-off the XMV; then set device setup DIP switch 7 to the down-
ward position and switch 8 to the upward position, and power-on the XMV.
During initialization, the [NETWORK], [YDIF], and [PANEL LOCK] indicators will blink. When ini-
tialization is complete, the [NETWORK] and [YDIF] indicators will blink. Turn off the power; then set
device setup DIP switches 7 and 8 to the upward position (RESUME), and power-on the XMV.
The following memory is initialized.
• Attenuator values
• Polarity settings
• HPF settings
• Analog/digital input setting
• [SIGNAL] indicator display setting
•Event log
* When the unit is shipped from the factory, the device setup DIP switches are all in the upward position.