Yamaha YDG2030 Using the display

7 – Using the display

YDG2030

Using the display

The [DISPLAY]key

Using the large LCD screen, your YDG2030 has several different ways of displaying set-

tings, and being able to edit them. These different modes are accessed with the [DISPLAY] key,

as shown:

Press the [DISPLAY] key to change from one display to the next.

NOTE

Only one channel can be displayed on the screen at a time.

Guide to the screen displays:

The [L/<] and [R/>] keys

Each of the above displays can show either the settings for the left channel, or the settings

for the right channel. To select which channel will be displayed, press the [L/<] or [R/>] key.

The LED on the corresponding key will light up, the display will change to show the new

channel, and either R or L will appear in the top left of the screen.

Linking channels

In order to change both the L and R channels at the same time, the L and R channels must be

linked. When the channels are linked, making any changes to one channel will also affect the

other. Existing parameters from one channel will not be copied to the other channel, unless

they are altered while the channels are linked.

To link the channels, press one of the two channel keys (either [L/<] or [R/>]), and while hold-

ing it down, press the other one. Because the screen can only show one channel at a time,

only the settings of the ﬁrst channel you pressed will be displayed, and the LED on that key

will light. The settings of the other channel will not be displayed, and its LED will blink.

Contents

Main GRAPHIC EQUALIZER OPERATING MANUAL MANUEL DUTILISATION BEDIENUNGSHANDBUCH YDG2030 FCC INFORMATION (U.S.A.) IMPORTANT NOTICE FOR THE UNITED KINGDOM CANADA Contents English Congratulations Precautions Backup battery Cautions Warnings The front panel B A 0 The rear panel 1 2 3 4 5 Memory areas How the memories are arranged in the YDG2030 Recalling an equalization setting Storing an equalization setting A note on software protection Using the display The [DISPLAY]key Guide to the screen displays: The [L/<] and [R/>] keys Linking channels The notch lter, and HPF and LPF indicators Utilities [%] SYSTEM SETUP TITLE EDIT BULK DUMP Y-485 NETWORK Y-485 COMM. I/O PARAMETER COPY SOFTWARE PROTECT MIDI CONTROL DELAY DISPLAY TUTORIAL Finding a suitable memory area in which to store the setting [^] or [%] Initializing the memory area Choosing 6 or 12dB boost/cut Linking the L and R channels Making graphic equalizer settings Using the sweep function Example I: Eliminating feedback Example II: Tuning a room Using the notch lters, and the HPF and LPF I. Turning the lters on and off individually II. Editing the lters graphically III. Editing the lters numerically Setting up the input level, attenuation and delay I. Input level and input attenuation II. Delay Specications Page User programs / Programmes utilisateur / User-Programme Unit number: ________ Programmer: _____________ Backed up to: ________ Date: ______ Program change table / Tableau de changement de programme / Program-Change-Tabelle Unit number: ________ Bank: ________ Backed up to: ____________ Date: ________ 68 Block diagram / Schma de principe / Blockdiagramm Block diagram / Schma de principe / Blockdiagramm DSP CPU 69 Dimensions / Abmessungen Dimensions / Abmessungen