Yamaha YDP-101 F5 , F4 , F6

27

YDP-101

The volume of the metronome sound can be changed. After selecting “F5”, use the [–/NO]

and [+/YES] buttons to set the metronome volume as required. The volume range is from 1

through 20. A setting of “1” produces minimum sound, while a setting of “20” produces

maximum metronome volume. Press the [–/NO] and [+/YES] buttons simultaneously to recall

the default setting “10”.

F5 Metronome Volume

F6 Piano Song Part Cancel Volume

This function sets the volume at which a “canceled” part is played during piano song

playback (see page 14 for information on the “part-cancel” function). Use the [–/NO] and [+/

YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting

of “0” produces no sound, while a setting of “20” produces maximum volume. Press the [–/

NO] and [+/YES] buttons simultaneously to recall the default setting “5”.

Adjust the part volume to a comfortable level to use the “canceled” part as a guide to play

along with. Set to “0” if you don’t want to hear the part.

■ SHORTCUT:You can jump directly to the metronome functions by pressing the [FUNC-

TION] button while holding the [METRONOME] button.

This function sets the left pedal for normal soft-pedal operation or for song start/stop

operation. Use the [–/NO] and [+/YES] buttons to select the desired left-pedal mode. “1” is

the normal soft-pedal mode and “2” is the start/stop mode. When the start/stop mode is se-

lected, the left pedal functions in the same way as the panel [START/STOP] button. Press the

[–/NO] and [+/YES] buttons simultaneously to recall the default setting “1”.

F4 Left Pedal Mode

The Function Mode

25

Contents

Main IMPORTANT WICHTIG IMPORTANT ENGLISH DEUTSCH FRANAIS ESPAOL IMPORTANT NOTICE FOR THE UNITED KINGDOM Connecting the Plug and Cord Model No. Serial No. USING THE BENCH SAVING USER DATA PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep these precautions in a safe place for future reference. WARNING CAUTION Introduction Included Accessories Contents The Dual Mode Reverb The Pedals Touch Sensitivity Transposition Tuning The Control Panel The Control Panel 1 890!@ # $ To open the key cover: To close the key cover: Key Cover & Music Stand To raise the music stand: To lower the music stand: Key Cover Music Stand Connections Set the Volume Select a Voice Play Add Reverb As Required Selecting & Playing Voices Turn Power On Playing the Demonstration Tunes Engage the Demo Mode Play a Voice Demo Voice Demo Exit From the Demo Mode Engage the Piano Song Mode Play a Piano Song Piano Song Exit From the Piano Song Mode Piano Song A-B Repeat Specify the Beginning (A) of the Phrase Specify the End (B) of the Phrase Stop Playback Piano Song Part Cancel Turn the Desired Part Off Start/Stop Playback Synchro Start Left Pedal Start/Stop The Dual Mode Other Dual Mode Functions Reverb Adjusting Reverb Depth The Pedals Soft (Left) Pedal Sostenuto (Center) Pedal Damper (Right) Pedal Touch Sensitivity Transposition Tuning Tuning Up Z X C Tuning Down The Metronome & Tempo Control The Metronome Metronome Time Signature Metronome Volume Function Tempo Control Using the Recorder Recording Make All Necessary Initial Settings Engage the Record Ready Mode Select the Record Track Using the Recorder Start Recording Stop Recording Erasing a Single Track Changing the Initial Settings Playback Synchro Start Left Pedal Start/Stop Using the Recorder The Function Mode To Select a Function Z X C F1 F2 F2.1: Scale F2.2: Base Note F3 F3.1: Dual Balance F3.2: Dual Detune F3.3: 1st Voice Octave Shift F3.4: 2nd Voice Octave Shift F3.5: Reset F5 F4 F6 A Brief Introduction to MIDI MIDI, the Musical Instrument Digital Interface, is a world- F7 F7.1: MIDI Transmit Channel Selection F7.2: MIDI Receive Channel Selection F7.3: Local Control ON/OFF F7.4: Program Change ON/OFF F7.5: Control Change ON/OFF F7.6: MIDI Transmit Transpose F7.7: Panel/Status Transmit F7.8: Bulk Data Dump F8.2: MIDI F8 Factory Preset Recall Options & Expander Modules Options Troubleshooting Expander Modules Voice Demo Tune Titles I Piano Song Titles Function Factory Setting List/Liste der Vorgabeeinstellungen/ Liste des rglages/Lista de ajustes de fbrica MIDI Data Format/MIDI-Datenformat/ Format des donnes MIDI/Formato de datos MIDI MIDI Data Format/MIDI-Datenformat/Format des donnes MIDI/Formato de datos MIDI 4. PROGRAM CHANGE Data format: [CnH] -> [ppH] 5. SYSTEM REALTIME MESSAGES 6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format) Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] -> 8. SYSTEM EXCLUSIVE MESSAGES (XG Standard) (1) XG Native Parameter Change Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] -> [mmH] -> [llH] -> [ddH] -> [F7H] (2) XG Native Bulk Data (reception only) Effect MIDI Map REVERB <Table 1> MIDI Parameter Change table ( SYSTEM ) <Table 2> Page Keyboard Stand Assembly Z X C (C). Assemblage du suppoet de clavier Z X C (C) V B N V B N B V B N V B N M < 7 8 M < teller. Wenn der Zusammenbau beendet ist, prfen Sie bitte folgende Dinge: M secteur < Noubliez pas de rgler la hauteur du pdalier Lorsque le montage est termin, veuillez me- ner bien les vrifications suivantes. M < Cuando haya concluido el montaje, com- pruebe los siguientes puntos: Specifications/Technische Daten/Caractristiques techniques/Especificaciones NORTH AMERICA CANADA U.S.A. CENTRAL & SOUTH AMERICA MEXICO http://www2.yamaha.co.jp/manual/english/