8 – Using the display – The
[[[[LL
LL//
//<<
<<]]
]]
and
[[[[RR
RR//
//>>
>>]]
]]
keys
YDP2006
The [L/<]
and [R/>]
keysWhen in stereo mode, each of the above displays can show either the settings for the left
channel, or the settings for the right channel. To select which channel will be displayed,
press the [L/<] or [R/>] key. The LED on the corresponding key will light up, the display will
change to show the new channel, and either R or L will appear in the top left of the screen.
In mono mode, if the unit is in PEQ mode, the [L/<] and [R/>] keys toggle between
equalization bands MONO.L 1-6 and MONO.R 1-6. If the unit is in notch mode, the [L/<] and
[R/>] keys toggle between notches 1-4, HPF, LPF (MONO.L), and MONO.R notches 1-4, as
shown above.
Display when in mono mode:
PEQ displays:
Graphical display of all active equalizer bands
(MONO.L 1-6 on one screen and MONO.R 1-6
on the other).
Numerical display of all equalization bands
(MONO.L 1-6 on one screen and MONO.R 1-6
on the other).
Delay and attenuation parameters.
Notch displays:
Graphical display of all active notch, HPF and
LPF filters (filters MONO.L 1-4, HPF and LPF
on one screen, and filters MONO.R 1-4 on the
other).
Numerical display of the notch, HPF and LPF
parameters.
R
PEQ
R
L
L
PEQ
PEQ
PEQ
PEQ
PEQ
R
L
R
L
NOTCH
NOTCH
Mono
NOTCH
NOTCH