GEN

IMPORTANT INFORMATION INFO

EBS00013

IMPORTANT INFORMATION

PREPARATION FOR REMOVAL AND

DISASSEMBLY

1.Before removal and disassembly remove all dirt, mud, dust and foreign material.

2. Use only the proper tools and cleaning

1

equipment.

Refer to “SPECIAL TOOLS”.

3.When disassembling always keep mated parts together. This includes gears, cylin- ders, pistons and other parts that have been “mated” through normal wear. Mated parts must always be reused or replaced as an assembly.

4.During disassembly, clean all of the parts and place them in trays in the order of dis- assembly. This will speed up assembly and allow for the correct installation of all parts.

5.Keep all parts away from any source of fire.

EBS00014

REPLACEMENT PARTS

1.Use only genuine Yamaha parts for all replacements. Use oil and grease recom- mended by Yamaha for all lubrication jobs. Other brands may be similar in function and appearance, but inferior in quality.

EBS00015

GASKETS, OIL SEALS AND O-RINGS

1.When overhauling the engine, replace all gaskets, seals and O-rings. All gasket sur- faces, oil seal lips and O-rings must be cleaned.

2.During reassembly properly oil all mating parts and bearings, and lubricate the oil seal lips with grease.

1 - 2