GEN
IMPORTANT INFORMATION INFO
_
_
_
EBS00019
CHECKING THE CONNECTIONS
Check the leads, couplers, and connectors for stains, rust, moisture, etc.
1.Disconnect:
•lead
•coupler
•connector
2.Check:
•lead
•coupler
•connector
Moisture → Dry with an air blower. Rust/stains → Connect and disconnect sev- eral times.
3.Check:
•all connections
Loose connection → Connect properly.
TIP
If the pin 1 on the terminal is flattened, bend it up.
4.Connect:
•lead
•coupler
•connector
TIP
Make sure all connections are tight.
5.Check:
•continuity (with the pocket tester)
Pocket tester
P/N.
TIP
•If there is no continuity, clean the terminals.
•When checking the wire harness, perform steps (1) to (3).
•As a quick remedy, use a contact revitalizer available at most part stores.
1 - 4