Yamaha YHT-470 INDEX SEARCH, To stop program play, PLAY, PROG, PLAY, Notes, To check programmed data, To correct programmed data, To cancel a programmed setting, included

To stop program play

Press the STOP button. The first track number programmed will be displayed.

To resume play, press the PLAY button. Play will begin from the beginning of the program.

To cancel a programmed setting

There are several methods, as described below.•Press the STOP button while the unit is stopped.•Open the disc tray.•Switch off the power.

To check programmed data

1.If the unit is in the play mode, press the STOP button.2.Press the PROG button.

3.Each time the SKIP button is pressed, the track numbers and sequential order of the programmed tracks can be checked one after another. The display of the track number can be returned (sequentially in reverse

order) by pressing the SKIP button.

To correct programmed data

1.Follow the procedure described in “To check programmed data”.2 Display the track number to be corrected by pressing the SKIP button.

3.Press a numeric button to select a track to replace the one displayed. The previously programmed track will be cleared from the memory and the new one will be programmed.

4.After the correction has been completed, once again press the PROG button or the PLAY button.

INDEX SEARCH

If the disc includes index numbers, play can be started from any desired index number.
				CLOSE
		1	2				3
1, 3		4	5				6
		7	8				9
								2
		0			10		INDEX
			SKIP				PLAY
						Notes
1 Select a track which has index numbers.
						•	Not all discs have index numbers. The index system is a
							method for sub-dividing tracks into smaller divisions (such
							as, for example, the movements within classical
3							symphonies) for easier location of those parts. The liner
							notes with the disc usually tell if such index numbers are
						•	included.
							If an index number is selected that is higher than any index
							number on that disc, play will start from the last index
						•	number point on the disc.
							For some discs, play may begin slightly prior to the actual
2
						•	designated index point.
							If the disc has no encoded index points, play will begin from
	INDEX					•	the start of the selected track.
							The index number can be designated only while the INDEX
							number display is illuminated.

3 Select the desired index number.

5

11