nRandom sequential tape-programming

The unit will automatically program tracks in random sequential order for recording to tape.

3, 44

 

 

 

 

2

 

1 Follow steps 1 – 3 on page 12.

Notes

 

 

•

Because the programmed data changes every time the

 

 

 

RANDOM button is pressed, the amount of time remaining

2

 

•

at the end of the tape also changes accordingly.

 

If the tape’s length is not enough, all tracks cannot be

RANDOM

 

programmed. In this case, exchange the tape for a longer

 

 

•

one.

 

 

 

 

In step 2, you can check the program data for side A and

 

 

 

side B.

1

2

 

 

 

 

* The unit will automatically program tracks for side A and

 

 

 

 

 

side B separately considering the tape’s total time.

 

 

 

 

3 Begin recording on the tape deck and press the PLAY

 

3

 

 

 

 

 

 

 

button on this unit at the same time.

 

 

4

 

 

 

 

 

 

4 The unit will pause at the end of side A of the tape.

➀ Shows the number of programmed tracks.

➁ Shows the total time of programmed tracks.

 

Turn the tape over to side B. Resume recording and, at

➂ Shows the side of the tape.

 

 

the same time, press the PLAY button or the PAUSE

➃ Shows the programmed track numbers.

 

button on this unit.

 

 

 

 

14