Yamaha DGX-630, YPG-635

12 DGX-630/YPG-635 Owner’s Manual

Setting Up

bPut the keyboard on the stand.

Check the back-to-front orientation for stand, and care-

fully place the keyboard on the side boards. Slowly move

the keyboard so that the holes on the bottom of the key-

board are properly aligned with the holes on the angle

brackets.

nInstall the keyboard to the stand.

Fix the keyboard to the angle brackets, using the screws

5–6

y5 x 16 mm

roundhead

screws

■Post-assembly checklist

Once you’ve assembled the stand, check the fol-

lowing points:

• Are there any parts left over?

➔If so, read the assembly instructions again and correct

any errors you might have made.

• Is the instrument clear of doors and other movable

ﬁxtures?

➔If not, move the instrument to an appropriate location.

• Does the instrument make a rattling noise when you

play it or move it?

➔If so, properly tighten all screws.

• Also, if the keyboard makes a creaking noise or

seems unsteady when you play it, refer carefully to

the assembly instructions and diagrams and

retighten all screws.

• Be careful not to drop the keyboard or to get your ﬁngers caught

between the keyboard and the stand parts.

CAUTION