Controls

Front Panel (Refer to page 2)

4POWER Switch and Indicator: Press to power on the YST-MSW10; the power indicator will light up. Press again to power off. Before powering on and off, turn down the VOLUME control.

5HIGH CUT Switch: This switch selects the high-cut filter

frequency: Set it to either LOW or HIGH.

6VOLUME Control: Use this control to set the volume level. Turn it clockwise to increase the volume, and counterclockwise to reduce it.

Auto Power On/Off Function

When powered on, if no input signal is received after 5–10 minutes, the power is switched off automatically. When an input signal is received, the power is switched back on automatically. This function works only when the power switch is in the on position.

Specifications

Type

Active Servo Processing Subwoofer

 

System

Amplifier output

25 W/4 Ω (THD 10%, 100 Hz)

High-Cut Filter

Low, High

Pressure Level

98 dB (max.)

Capacity

8.0 l

Frequency response

35 to 250 Hz (–10dB)

Speaker unit

6.3" (16 cm) cone woofer, magnetic

 

shielding

Power supply

AC 120 V, 60 Hz

Power consumption

25 W

Dimensions (W ⋅ H ⋅ D) 280 (11") ⋅ 200 (7.9") ⋅ 248.5 (9.8") mm

Weight

5.5 kg (12.1 lbs)

Accessories

Mini plug cable ⋅ 1

 

RCA pin to Mini plug adaptor ⋅ 1

 

1/4" Phone to Mini plug adaptor ⋅ 1

* Specifications subject to change without notice.

English

4