CONNECTIONS

Caution: Plug in the subwoofer and other audio/video components after all connections are completed.

cAll connections must be correct, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Also refer to the owner’s manual for each of your components.

c<China and General models only>

Set the VOLTAGE SELECTOR switch to the proper voltage of your area BEFORE plugging in the subwoofer.

cThe subwoofer can be connected to either the line output (pin jack) terminals or the speaker output terminals of the amplifier. Choose one of the ways shown in this section that is more suitable for your audio system. Also, refer to the owner’s manual of your component to be connected to the subwoofer.

Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. (Refer to pages 4 and 5 for details.) If your amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the amplifier. (Refer to pages 6 and 7 for details.)

Connecting to line output (pin jack) terminals of the amplifier

Connect the main speakers to the speaker output terminals of the amplifier.

cTo connect with a YAMAHA DSP amplifier (or AV receiver), connect the SUBWOOFER (or LOW PASS etc.) terminal on the rear of the DSP amplifier (or AV receiver) to the L/MONO INPUT2 terminal of the subwoofer.

cWhen connecting the subwoofer to the SPLIT SUBWOOFER terminals on the rear of the DSP amplifier, be sure to connect the L/MONO INPUT2 terminal to the “L” side and the R INPUT2 terminal to the “R” side of the SPLIT SUBWOOFER terminals.

mUsing one subwoofer

Right main speaker

Subwoofer

OUTPUT

/MONO

TO SPEAKERS

 

FROM AMPLIFIER

INPUT

INPUT

2

1

To AC outlet

Left main speaker

Pin plug cord (not included)

SPLIT SUBWOOFER

Amplifier

SUBWOOFER (LOW PASS)

E-4