mUsing two subwoofers
Connect the speaker output terminals of the amplifier to the INPUT1 terminals of the subwoofer, and connect the OUTPUT terminals of the subwoofer to the main speakers.
Right main speaker | Left main speaker |
English
/MONO | OUTPUT | /MONO | OUTPUT |
TO SPEAKERS | TO SPEAKERS |
Subwoofer |
|
| Subwoofer |
| FROM AMPLIFIER |
| FROM AMPLIFIER |
INPUT | INPUT | INPUT | INPUT |
2 | 1 | 2 | 1 |
Amplifier
To AC outlet | Speaker output | To AC outlet | |
terminals | |||
|
|
Connecting to the INPUT1/OUTPUT terminals of the subwoofer
For connections, keep the speaker cords as short as possible. Do not bundle or roll up the excess part of the cords. If the connections are faulty, no sound will be heard from the subwoofer or the speakers, or both of them. Make sure that the + and – polarity markings of the speaker cords are observed and set correctly. If these cords are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other as this could damage the subwoofer or the amplifier, or both of them.
How to Connect:
Red: positive (+)
Black: negative
2 | 1 Loosen the knob. |
1 | 2 Insert the bare wire. |
| [Remove approx. |
3 | 10 mm (3/8”) |
insulation from the |
speaker wires.]
3 Tighten the knob and secure the wire.
<U.S.A., Canada and Australia models only>
Banana Plug connections are also possible.
1
2 
1Tighten the terminal knob.
2Simply insert the Banana Plug connector into the terminal.