Manuals / Yard-Man / Lawn and Garden / Cultivator

Yard-Man 21A-144R401 manual Gas Fill-Up, Starting Engine, Fuel Additives, Starting a Warm Engine

Models: 21A-144R401

1 16
Download 16 pages 11.61 Kb
Page 7
Image 7

•Remove the oil plug/dipstick from the crankcase and pour the entire bottle of oil into the oil fill hole. See Figure 3.

•Wipe up any oil that may have spilled and reinstall the oil fill plug/dipstick.

DipStick

Fuel Cap

Figure 3

Gas Fill-Up

Old fuel is the primary reason for the unit not running properly. Be sure to use fresh, clean, and unleaded gasoline. Use fresh fuel (less than 60 days old), when using alcohol-blended fuel.

NOTE: This is a 4-cycle engine. In order to avoid damage to the unit, do not mix oil with gasoline.

Fuel Additives

The use of fuel additives or gas stabilizer will inhibit cor- rosion and minimize the formation of gum deposits. Using a fuel additive can keep fuel from forming harmful deposits in the carburetor for up to six (6) months. Add

0.8oz. (23ml) of fuel additive per gallon of fuel accord- ing to the instructions on the container. Never add fuel additives directly to the unit’s gas tank.

•Lay the cultivator back in a horizontal position on a flat level surface with the upper handle touching the ground.

•Remove fuel cap and remove the tag from the fuel tank neck. Refer to Figure 3.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoors or while the engine is hot or running. Extinguish cigarettes, cigars, pipes, and other sources of ignition.

•Place spout of gas container into the fill hole on the fuel tank and fill tank.

•Wipe up any gasoline that my have spilled and reinstalled the fuel cap.

•Move the unit at least 30 ft. (9.1m) from the fueling source and site before starting the engine.

Starting Engine

•Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug is fastened securely over the metal tip on the spark plug.

•Push On/Off switch on upper handle to On (I).

•Place choke lever in Close (A) position. See Figure 4.

•Fully press and release the primer bulb slowly 5 to 7 times. Gasoline should be felt and visible in the bulb. Press primer a few more time, if gasoline is not noticed. See Figure 4.

Choke Lever

Primer Bulb

Figure 4

•With one hand grasping the starter handle, the other hand should grasp the front handle on the cultivator for a brace.

•Pull the starter rope briskly 3 to 5 times or until engine attempts to run.

•Move the choke to Partial (B) position.

NOTE: The engine will not operate in the Open (A) position.

•Pull the starter rope again 1 to 3 times until engine starts.

•Move choke lever to Open (C) position.

•With tines off the ground, depress the throttle lever against the upper handle to increase engine speed and rotate tines.

WARNING: Never run the engine indoors or in a poorly ventilated area. Engine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair, and loose clothing away from rotating tines.

Starting A Warm Engine

•Push On/Off switch on upper handle to On (I).

•Move the choke to Partial (B) position.

•Fully press and release the primer bulb slowly 5 to 7 times. Gasoline should be felt and visible in the bulb. Press primer a few more time, if gasoline is not noticed. See Figure 4.

7

Page 6 Page 8
Page 7
Image 7
Yard-Man 21A-144R401 manual Gas Fill-Up, Starting Engine, Fuel Additives, Starting a Warm Engine
Page 6 Page 8

21A-144R401 specifications

The Yard-Man 21A-144R401 is a versatile and dependable riding lawn mower designed to meet the needs of homeowners seeking efficiency and convenience for their lawn maintenance tasks. With a robust construction and a variety of features, this model stands out in the competitive lawn care market.

One of the key features of the Yard-Man 21A-144R401 is its powerful engine. Equipped with a reliable gas-powered engine, this riding mower provides ample power to tackle even the toughest grass and terrain. The engine is easy to start, ensuring you spend more time mowing and less time fumbling with difficult starting mechanisms.

Another significant characteristic is the mower's cutting deck. The 42-inch deck size strikes a perfect balance between maneuverability and coverage, allowing users to navigate through tight spaces while still efficiently cutting large areas of grass. The deck height is adjustable, offering six different positions to suit various grass types and desired cutting lengths, ensuring a clean and precise cut every time.

The Yard-Man 21A-144R401 is designed with user comfort in mind. It features a high-back seat that provides ample support during longer mowing sessions, along with easy-to-reach controls and a smooth steering system that enhances the overall user experience. The compact design of the mower allows for easy storage and makes it simple to transport.

In terms of technology, this riding mower includes features such as an automatic transmission, which allows for seamless gear transitions. This technology simplifies mowing tasks, as the mower automatically adjusts to the terrain, ensuring a consistent speed and optimal performance no matter the conditions.

Additionally, safety is prioritized in the design of the Yard-Man 21A-144R401. It comes with a set of safety features, such as a blade brake that stops the mower blades when the operator leaves the seat, preventing accidents and ensuring peace of mind during operation.

In summary, the Yard-Man 21A-144R401 is an excellent choice for homeowners looking for an efficient, reliable, and user-friendly riding lawn mower. With its powerful engine, adjustable cutting deck, comfortable seating, and modern technology, this mower is designed to make lawn care tasks easier and more enjoyable. Whether tackling large lawns or smaller landscaped areas, the Yard-Man 21A-144R401 proves to be a dependable companion in every season.