Assembling Your Cultivator | Yard-Man 21A-144R401 manual

SECTION 2: ASSEMBLING YOUR CULTIVATOR

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual before operating your mower.

NOTE: Reference to right or left hand side of the cultivator is observed from the operating position.

Removing Unit From Carton

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove loose parts if included with unit (e.g., operator’s manual, safety glasses, etc.)

•Cut along corners, lay carton down flat, and remove packing material.

•Roll or slide unit out of carton and check carton thoroughly for loose parts.

Disconnecting Spark Plug Wire

Before setting up your cultivator, disconnect the spark plug wire from the spark plug and ground to a stud on the engine.

Setting Up Your Cultivator

•Loosen each wing nut enough to separate the plastic connectors between the upper and lower handle. Gently lift up and pull back on the upper handle to raise the handle toward the operating position. See Figure 1.

•Separate the connectors and position the bottom tip of upper handle connector in front of the bottom tip of lower handle connector.

•The lower handle connector has three marked lines on the top and the upper handle connector has one marked line.

•Position the connectors aligning the marked line on the upper connector with the middle marked line on the lower connector.

•To secure the upper and lower handle, tighten the wing nuts and washers (carriage bolts must be seated properly into the handle and grooves must line up between connectors).

•Tighten the cable ties on the left side of handle.

Marked
Lines
	Carriage
	Bolt
Wing Nut	Lower Handle	Upper Handle
Wing Nut	Connector	Upper Handle
	Connector	Connector
		Connector

Figure 1

SECTION 3: KNOW YOUR CULTIVATOR

Read this operator’s manual and safety rules before operating your cultivator. Compare the illustrations in Figure 2 with your cultivator to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

Starter Handle

The starter handle is attached to an eyebolt in the front of the engine.

Throttle Lever

The throttle lever is located on the upper handle. Squeezing the lever against handle speeds up the engine and engages the cultivator tines. Release the handle to stop the tines.

Choke Lever

The choke lever is located on the right side of engine and it is used to enrich the fuel mixture when starting a cold engine.

A B C

Close Partial Open

Primer Button

The primer button is located on the right side of engine and it is used in conjunction with the choke to enrich the fuel mixture in the carburetor when starting a cold engine.

21A-144R401 specifications

The Yard-Man 21A-144R401 is a versatile and dependable riding lawn mower designed to meet the needs of homeowners seeking efficiency and convenience for their lawn maintenance tasks. With a robust construction and a variety of features, this model stands out in the competitive lawn care market.

One of the key features of the Yard-Man 21A-144R401 is its powerful engine. Equipped with a reliable gas-powered engine, this riding mower provides ample power to tackle even the toughest grass and terrain. The engine is easy to start, ensuring you spend more time mowing and less time fumbling with difficult starting mechanisms.

Another significant characteristic is the mower's cutting deck. The 42-inch deck size strikes a perfect balance between maneuverability and coverage, allowing users to navigate through tight spaces while still efficiently cutting large areas of grass. The deck height is adjustable, offering six different positions to suit various grass types and desired cutting lengths, ensuring a clean and precise cut every time.

The Yard-Man 21A-144R401 is designed with user comfort in mind. It features a high-back seat that provides ample support during longer mowing sessions, along with easy-to-reach controls and a smooth steering system that enhances the overall user experience. The compact design of the mower allows for easy storage and makes it simple to transport.

In terms of technology, this riding mower includes features such as an automatic transmission, which allows for seamless gear transitions. This technology simplifies mowing tasks, as the mower automatically adjusts to the terrain, ensuring a consistent speed and optimal performance no matter the conditions.

Additionally, safety is prioritized in the design of the Yard-Man 21A-144R401. It comes with a set of safety features, such as a blade brake that stops the mower blades when the operator leaves the seat, preventing accidents and ensuring peace of mind during operation.

In summary, the Yard-Man 21A-144R401 is an excellent choice for homeowners looking for an efficient, reliable, and user-friendly riding lawn mower. With its powerful engine, adjustable cutting deck, comfortable seating, and modern technology, this mower is designed to make lawn care tasks easier and more enjoyable. Whether tackling large lawns or smaller landscaped areas, the Yard-Man 21A-144R401 proves to be a dependable companion in every season.

Yard-Man 21A-144R401 Assembling Your Cultivator, Know Your Cultivator, Removing Unit From Carton

Models: 21A-144R401