Yard-Man 5KL Safety & Decorative Labels, 9.5HP, Operators View, 777I22363, 777S32066, Danger

Safety & Decorative Labels

OPERATORS VIEW

777I22334

CHUTE DIRECTIONAL CONTROLCHUTE TILT DOWN

777I22363

DRIVE

AUGER

LOCK

777S32066

TOOL OUT-CLEAN	DANGER
.MANUAL OPERATOR'S READ .5
.SURFACES GRAVEL
ON OPERATING WHEN CAUTION EXTRA USE
.BYSTANDERS AT DISCHARGE DIRECT NEVER
INJURIES, OBJECTS THROWN AVOID TO .4
.MACHINE SERVICING OR UNCLOGGING
BEFORE STOPPED HAVE PARTS MOVING
ALL UNTIL HANDLES BEHIND REMAIN AND
ENGINE, STOP LEVERS, CLUTCH DISENGAGE .3
.CHUTE DISCHARGE
UNCLOG TO TOOL OUT-CLEAN USE .2
.FEET AND HANDS AMPUTATE CAN AUGER	AVOID INJURY FROM
OR IMPELLER WITH CONTACT .AUGER AND
IMPELLER ROTATING FROM AWAY KEEP .1	ROTATING AUGER -
DANGER	KEEP HANDS, FEET
	AND CLOTHING AWAY.

777D08384

POWER STEERING

777D08367

777S32236

DANGER

NEVER PUT HAND IN CHUTE. CONTACT WITHROTATING PARTS CAN AMPUTATE FINGERS

AND HANDS.

SHUT OFF ENGINE AND WAIT UNTIL ALLMOVING PARTS HAVE STOPPED BEFORE

UNCLOGGING.

USE CLEAN-OUT TOOL OR WOODEN STICK TOUNCLOG DISCHARGE CHUTE.

9.5HP / 26"

Electric Start • Single Hand Operation • 12" Impeller

PUSH BUTTON	PUSH BUTTON
ROTATE	CHUTE ROTATE
CHUTELEFT	RIGHT

CHUTE TILT UPSTARTING INSTRUCTIONS: 1.) INSERT IGNITION KEY AND SNAP IN PLACE.

2.) SET CHOKE AND THROTTLE TO FULL (ON) POSITION. PUSH PRIMER BUTTON 3x.

3.) ROPE START:

PULL SLOWLY UNTIL HARDER TO PULL, THEN PULL RAPIDLY TO START. REPEAT PRIMING IF NEEDED.

ELECTRIC START:

DO NOT USE IN RAIN. CONNECT POWER

CORD AND PUSH STARTER BUTTON.REPEAT PRIMING IF NEEDED.4.) MOVE CHOKE SLOWLY TO OFF POSITION.5.) TO STOP ENGINE: MOVE THROTTLE TO STOP POSITION.

777I22347

AUGER CONTROL	LEFT TURN	SHEAR PIN	RIGHT TURN	DRIVE CONTROL
	TRIGGER CONTROL		TRIGGER CONTROL
		STORAGE

(MODEL PLATE)

26