SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
•SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used in conjunction with other symbols or pictographs.
•WARNING - READ
OPERATOR'S MANUAL
Read the Operator’s Manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders.
•WEAR EYE AND HEARING PROTECTION
WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI
• KEEP BYSTANDERS AWAY
WARNING: Keep all bystanders, especially children and pets, at least 50 feet (15 m) from the operating area.
•PRIMER
Push primer bulb, fully and slowly, 10 times.
•UNLEADED PETROL
Always use clean, fresh unleaded petrol.
SYMBOL MEANING
• THROWN OBJECTS CAN CAUSE SEVERE INJURY
WARNING: Keep clear of blower outlet. Never point the blower at yourself or others. Objects can be thrown from blower. Do not operate unit without proper attachments and guards in place.
•ON/OFF STOP CONTROL
ON / START / RUN
•ON/OFF STOP CONTROL
OFF or STOP
•HOT SURFACE WARNING
Do not touch a hot muffler or cylinder. You may get burned. These parts get extremely hot from operation. They remain hot for a short time even after the unit is turned off.
•SHARP BLADE
WARNING: Sharp blade on cutting head guard. To prevent serious injury, do not touch line cutting blade.
1 | 2 | 3 • CHOKE CONTROL |
1. FULL choke position.
2.PARTIAL choke position.
3.RUN position.
•OIL
Refer to operator's manual for the proper type of oil.
•DO NOT USE BLADES
WARNING: To prevent serious personal injury, do not attach or operate the unit with any type of blade.
5