SECTION 8: OFF-SEASON STORAGE

The following steps should be taken to prepare lawn mower for storage.

•Clean and lubricate mower thoroughly as described in the lubrication instructions.

•Refer to engine manual for correct engine storage instructions.

•Coat mower’s cutting blade with chassis grease to prevent rusting.

•Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer.

NOTE: When storing any type of power equipment in an unventilated or metal storage shed, care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all moving parts.

SECTION 9: TROUBLE SHOOTING GUIDE

Trouble

Possible Cause(s)

Corrective Actions

 

 

 

 

 

Engine fails to

1.

Blade control handle disengaged.

1.

Engage blade control handle.

start

2.

Spark plug wire disconnected.

2.

Connect wire to spark plug.

 

3.

Dirty aircleaner.

3.

Refer to the engine manual packed with your unit.

 

4.

Primer button not depressed.

4.

Refer to the engine manual packed with your unit.

 

5.

Fuel tank empty or stale fuel.

5.

Clean fuel line.

 

6.

Blocked fuel line.

6.

Clean, adjust gap or replace.

 

7.

Faulty spark plug.

7.

Refer to the engine manual.

 

8.

Engine flooded.

8.

Wait for a while and crank the engine.

Engine runs

1.

Blocked fuel line or stale fuel.

1.

Clean fuel line; fill tank with clean, fresh gasoline.

erratic

2.

Carburetor out of adjustment.

2.

Refer to the engine manual packed with your unit.

Engine

1.

Engine oil level low.

1.

Fill crankcase with proper oil.

overheats

2.

Dirty air cleaner.

2.

Refer to the engine manual packed with your unit.

 

3.

Air flow restricted.

3.

Stop engine and disconnect spark plug wire. Remove

 

 

 

 

blower housing and clean.

 

4.

Carburetor not adjusted properly.

4.

Refer to the engine manual.

Occasional skip

1.

Spark plug gap too close.

1.

Adjust gap to.030".

(hesitates) at

2.

Carburetor idle mixture

2.

Refer to the engine manual packed with your unit.

high speed

 

adjustment improperly set.

 

 

Idles poorly

1.

Spark plug fouled, faulty or gap

1.

Reset gap to.030" or replace spark plug.

 

 

too wide.

 

 

 

2.

Carburetor not adjusted.

2.

Refer to the engine manual.

Excessive

1.

Cutting blade loose or

1.

Tighten blade and adapter. Balance blade.

vibration

 

unbalanced.

 

 

 

2.

Bent cutting blade.

2.

See an authorized service dealer.

Mower will not

1.

Wet grass.

1.

Wait until later to cut.

mulch grass

2.

Excessively high grass.

2.

Mow once at a high cutting height, then mow again at

 

 

 

 

desired height.

Uneven cut

1.

Wheels positioned incorrectly.

1.

Place all four wheels in same height position.

 

2.

Dull blade.

2.

Sharpen or replace blade.

NOTE: For repairs beyond those listed above, contact your local authorized service representative.

13

Page 12 Page 14
Page 13
Image 13
Yard Machines 20 manual Trouble Shooting Guide, OFF-SEASON Storage
Page 12 Page 14

20 specifications

The Yard Machines 20 is a versatile and powerful outdoor equipment designed for homeowners looking for efficiency and ease of use in their lawn care routine. This machine brings a blend of technology and practical features that make lawn maintenance tasks simpler and more effective.

One of the standout characteristics of the Yard Machines 20 is its robust engine. Equipped with a reliable 140cc OHV engine, this machine provides ample power for tackling a variety of lawn challenges. Whether you are mowing through thick grass or dealing with uneven terrain, the engine's performance ensures a consistent and effective cutting experience.

The cutting deck of the Yard Machines 20 is another impressive feature. With a 20-inch steel deck, it offers a durable and stable cutting surface. The size of the deck strikes an excellent balance between maneuverability and cutting width, allowing users to navigate through tight spots while still covering a significant amount of ground quickly.

Additionally, the Yard Machines 20 offers adjustable cutting height settings, providing users with the flexibility to choose the grass height that best suits their lawn’s needs. This feature accommodates various grass types and personal preferences, ensuring an even cut every time.

In terms of comfort, the Yard Machines 20 is designed with ergonomics in mind. Its adjustable handle allows users of different heights to find a comfortable grip, reducing fatigue during prolonged use. This attention to user comfort extends to features like easy-start technology, making it convenient to get the machine running with minimal effort.

The Yard Machines 20 also boasts a compact design, making storage easy when the mowing season is over. Its lightweight construction allows for easy transport, whether moving it around the yard or taking it elsewhere.

Overall, the Yard Machines 20 combines power, efficiency, and user-friendly features to make it a fantastic option for homeowners seeking to maintain their lawns effortlessly. With its durable construction and thoughtful design, this machine is set to become an essential tool in any garden enthusiast’s collection. Whether you are a seasoned gardener or a novice, the Yard Machines 20 is geared towards making lawn care a more enjoyable and efficient process.
Top Page Image Contents