SECTION 3: FINDING MODEL NUMBER
This owner’s guide is an important part of your new
Before you start assembling the mower for its first use, please locate its model plate and copy the information on to this owner’s guide. The information on the model plate is very important if you contact a service center or the
•Every mower has a model plate. You can locate it by standing behind the unit in the operating position and looking down at the cutting deck.
•The model plate will look like Figure 1.
This is where mower model number will be.
XXX-X-XXX-X-XXX XXXXXXXXXXX
This is where mower serial number will be.
Copy the model number here:
MTD PRODUCTS INC Copy the serial number here:
CLEVELAND, OHIO 44136
FIGURE 1
SECTION 4: UNPACKING
Removing Unit From Carton
•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.
•Remove loose parts if included with unit (i.e., owner's manual, etc.). See Figure 2.
OWNER’S |
MANUAL |
FIGURE 2
•Cut along dotted lines and lay carton down flat. Remove packing material.
•Roll or slide unit out of carton. Check carton thoroughly for loose parts. See Figure 2.
NOTE: Make sure not to crimp the cables while removing the loose parts or the entire unit from the carton.
NOTE: Reference to right or left hand side of the mower and/or front or behind the mower is observed from the operating position.
6