Lubricate pivot point
Lubricate |
torsion spring |
Lubricate pivot point
Lubricate axle bolt, inner surface of wheel
Figure 17
SECTION 12: MAINTENANCE
WARNING: Always stop engine and disconnect spark plug wire before performing any maintenance work or adjustments on your lawn mower.
Cleaning Mower
The underside of the mower deck should be cleaned after each use to prevent any
•Disconnect spark plug wire. Drain the gasoline from the lawn mower, or place a piece of plastic under the gas cap.
•Tip the mower so that it rests on the housing. Keep the side with the air cleaner facing up. Hold the mower firmly.
•Scrape and clean the underside of the deck with a suitable tool. Do not use water.
•Put the mower back on its wheels on the ground. If you had put plastic under the gas cap, make sure to remove it now.
WARNING: Never tip the mower more than 90 degrees and do not leave the mower tipped for any length of time. Oil can drain into the upper part of the engine causing problems in starting the engine.
Blade Care
•Disconnect spark plug wire from spark plug.
•Turn mower on its side making sure that the air filter and the carburetor are up.
•Periodically inspect the blade adapter for cracks, especially if you strike a foreign object. Replace when necessary.
WARNING: When removing the cutting blade for sharpening or replacement, protect hands by using heavy gloves or a rag to grasp the cutting blade.
18
