Yard Machines MTD1400K manual Specifications, Maintenance Instructions

MAINTENANCE INSTRUCTIONS

Before replacing the top cover assembly ensure that the V-cutter is positioned as shown in (Fig. 13) Replace the top cover assembly and secure tightly the caging knobs. If caging Knobs are not tight the motor will not start due to the motor lock out switch not bein activated.

CLEANING After use, always wipe clean the outside of the Shredder to remove any build up of material with a damp cloth. Clean the inside of the cutting chamber and

remove any left over material, Do not hose down with water.

IMPORTANT: Before replacing top cover assembly ensure that the V-cutter is positioned as shown in (Fig.

13).Fig. 13 Replace the top cover assembly together with the top

cover screw knob ensuring this is tight. If the top cover screw knob is not tight the motor will not start due to the motor lock out switch not being activated.

SPECIFICATIONS

MODEL NO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MTD1400K

Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V~, 60Hz, 14Amp

Hopper Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .394x270x200mm (15-1/2”x10-5/8”x7-7/8”)

No Load Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 300 min-1/RPM

Net Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 Lbs (35 Kg)

11