index mark (3.5).

FILM LOADING (35 mm film)

1.Pull out the 35mm Film Rewind Release Button

(R) and give it a slight twist in either direction.

2.Install the 35 mm Picture Frame by proceeding as follows: After making sure that the sprocket end of the frame is set toward the upper Film Chamber, fit the spring bar into the lower edge, and, while pushing the frame in the direction of the arrow, install it properly into position.

3.Reset the 35 mm Film Rewind Release Button to its original position by turning it in either direction.

4.Screw the Spacer Ring on the threaded mount around the right spool stud in the lower Film Chamber.

1.35 mm Take-up Spool

2.Sprocket Wheel

3.35 mm Picture Frame

4.Pressure Plate Guide Socket

5.Pressure Plate

6.Spring Bar

7.35 mm Film Leader

8.35 mm Spool Stud Adapter

9.35 mm Film Cassette

10.Spacer Ring

11.Pressure Plate Guide Pin