5.Insert the Spool Stud Adapter into the spool spindle of the Film Cassette.

6.Place the Film Cassette in the lower Film Chamber by pulling out the Spool Stud Knob as illustrated. Then, pull out the film leader gently.

7.Set the 35 mm Take-up Spool in the upper Film Chamber. First, fit the cut-out on the right into the right spool stud. Then, while pulling out the 35 mm Film Advance Knob (Spool Stud Knob), set the spool into position. Reset the Film Advance Knob to its original position and wind it until it locks automatically.

8.Insert the film leader into the slot on the Take- up Spool and, after pressing the 35 mm Film-stop Release located directly below the Film Rewind Release Button (R), wind the 35 mm Film Advance Knob.

9.After making sure the perforations on the film properly engage the sprocket teeth, set the Pressure Plate by matching the Guide Pins with the Guide Sockets and pressing it firmly against the 35 mm Picture Frame.