ASSEMBLY
7.Place the hood assembly on to the hitch 8. Open the hood and secure the (2) springs
assembly. Place both hood hinges between | to the bolts on the hood assembly and the |
the upper hitch mounts on the hitch assembly. | hitch assembly. Figure 4. |
Be sure that the rubber seal is on the inside |
|
of the hood. Place the (2) friction washers |
|
between the hood hinge and the upper hitch |
|
mount. Place (2)990563, 3/8 x 1 bolt thru the |
|
hinge and mount. Secure with (2) 976979, |
|
3/8 nyloc nut. Figure 4. |
|
HOOD ASSEMBLY |
| |
| HOOD HINGE | |
| 3/8 X 1 BOLT | |
| 3/8 NYLOC NUT | |
RUBBER SEAL | UPPER HITCH MOUNT | |
HITCH PIN | ||
|
FIGURE 4
9
