USER INSTRUCTIONS
4.UPGRADING YOUR STOVE
4.1Your stove is fitted with a control valve that can be upgraded to battery powered Remote Control. This upgrade can be fitted by anyone capable of simple DIY jobs. Your Yeoman dealer keeps two versions of the remote:
4.2STANDARD REMOTE CONTROL (Yeoman PART NUMBER YM-8455)
This remote controls the gas stove after the pilot has been lit to:
•Turn on the main burner
•Regulate the flame from low to high and back
•Turn off the burner leaving just the pilot burning
4.3THERMOSTATIC AND TIMER REMOTE CONTROL (Yeoman PART NUMBER
This remote controls the gas stove after the pilot has been lit. In ‘MANUAL MODE’ you can:
•Turn on the main burner
•Regulate the flame from low to high and back
•Turn off the burner leaving just the pilot burning
In ‘AUTO MODE’ you can:
•Set the room temperature so the stove automatically maintains that temperature
In ‘TIMER MODE’ the stove:
•Turns on and off according to the set time periods
•Automatically regulates the room temperature during the set periods
NOTE: WHEN OPERATING THE FIRE IN TEMP OR TIMER MODE, THE PILOT REMAINS LIT AND THE FIRE THEN AUTOMATICALLY SWITCHES ON AT PROGRAMMED TIMES TO BRING THE ROOM TO THE SET TEMPERATURE WHETHER OR NOT YOU ARE IN THE ROOM.
NEVER LEAVE ANY COMBUSTIBLE MATERIALS WITHIN 1 METRE OF THE FRONT OF THE APPLIANCE.
5. CLEANING THE FIRE
WARNING: DO NOT ATTEMPT TO CLEAN THE STOVE UNTIL IT IS COLD. THE STOVE RETAINS ITS HEAT FOR A CONSIDERABLE TIME AFTER SHUTDOWN.
NOTE: THE CAST IRON DOOR IS HEAVY, TAKE EXTREME CARE WHEN HANDLING.
5.1Single Door
To open the door and access the interior:
•Turn the
•Pull the door open
3
AR1941
Double Door
To open the door:
•Turn the knob on the right door to release the catch, Diagram 4
4
AR1942
•Remove the glass frame by undoing the eight screws, Diagram 5
5
AR1941
•Lower the frame down to clear the top edge before lifting clear, Diagram 6