Exmoor/Exe/Devon/County
Freestanding Stove
Multi Fuel kit INSTALLATION
For use in GB & IE (Great Britain and the Republic of Ireland).
This kit has been certified for use in countries other than those stated. To install this
Models:
1. General
Please refer to Installation Instructions supplied with with the appliance (PM306 Instructions for Use, Installation & Servicing). If you do not have a copy of this manual visit
This document should be fully read and understood in conjunction with the Installation instructions supplied with the appliance and if there are any queries contact your Yeoman dealer.
Exmoor M/F Kit -
Exe M/F Kit-
Devon M/F Kit-
County M/F Kit-
1.1The optional
Remove the log guard and the drop in front plate. Remove the fire bricks.
Remove the blanking bolt that is fitted in the grate operating rod hole.
This is located on the front of the stove near the lower right hand corner of the door (not applicable for County models). To do this loosen the M8 nut on the inside of the stove.
Blanking Bolt
PM570 Issue 1 (October 2010)