to shipment. All unit wiring shall be both numbered and color coded. All units shall be manufactured in a facility cer- tified to ISO 9001 standards, and the cooling performance shall be rated in accordance with DOE and ARI test proce- dures. The heating performance shall be rated to DOE and GAMA test procedures. Units shall be CSA listed and classi- fied to ANSI Z21.47/CAN/CSA 2.3 standards and UL 1995/ CAN/CSA No. 236-M90 conditions.

UNIT CABINET

Unit cabinet shall be constructed of G90 galvanized steel, with exterior surfaces coated with a non-chalking, powdered paint finish, certified at 1000 hours salt spray test per ASTM- B117 standards. The unit top shall be a single piece “Water Shed” design, with drip edges and no-seam corners to pro- vide optimum water integrity. Unit shall have a rigidly mounted condenser coil guard to provide protection from objects and personnel after installation. Indoor blower section shall be insulated with up to 3/4” thick, aluminum, foil faced insulation, fastened to prevent insulation from entering the air stream. Cabinet panels shall be “large” size, easily remov- able for servicing and maintenance, with built-in lift handles. Unit shall be built on a formed, “Super-Structure” design base pan, with embossments at critical points to add strength, rigidity and aid in minimizing sound. Full perimeter base rails shall be provided to assure reliable transit of equipment, overhead rigging, for truck access and proper sealing on roof curb applications. Base rails shall be removable, when required, to lower unit height. Filters shall be furnished and be accessible through a removable access door, sealed air- tight. Units vertical discharge and return duct configuration shall be designed to fit between standard 24” O.C. beams without modification to building structure, duct work and base unit. Condensate pan shall be internally sloped and conform to ASHRAE 62-89 self-draining standards, with 3/4” NPTI copper, ridged mount connection.

INDOOR (EVAPORATOR) FAN ASSEMBLY

Fan shall be direct drive, multi-speed design. Job site selected (BHP) brake horsepower shall not exceed the motors nameplate horsepower rating. Fan wheel shall be double-inlet type with forward-curved blades, dynamically balanced to operate smoothly throughout the entire range of operation. Airflow design shall be constant air volume. Bear- ings shall be sealed and permanently lubricated for longer life and no maintenance. Fan assembly shall be “Slip Track” (slide-out) design for easy removal and cleaning.

OUTDOOR (CONDENSER) FAN ASSEMBLY

The outdoor fan shall be of the direct-driven propeller type, discharge air vertically, have aluminum blades riveted to cor-

rosion resistant steel spider bracket and shall be statically balanced for smooth operation. The outdoor fan motor shall be totally enclosed with permanently lubricated bearings and internally protected against overload conditions.

REFRIGERANT COMPONENTS

Compressors:

a.Shall be fully hermetic type, direct drive, internally protected with internal high-pressure relief and over temperature protection. The hermetic motor shall be suction gas cooled and have a voltage range of + or - 10% of the unit nameplate voltage.

b.Shall have internal isolation and sound muffling to minimize vibration and noise, and be externally iso- lated on a dedicated, independent mounting.

Coils:

a.Evaporator and condenser coils shall have alumi- num plate fins mechanically bonded to seamless internally enhanced copper tubes with all joints brazed.

b.Evaporator coil shall be of the direct expansion, blow through design, while condenser coil shall be draw through design.

Refrigerant Circuit and Refrigerant Safety Components:

a.Shall include independent fixed-orifice expansion devices.

b.Shall include filter/strainer to eliminate any foreign matter.

UNIT OPERATING CHARACTERISTICS

Unit shall be capable of starting and running at 125º F out- door temperature, exceeding maximum load criteria ARI Standard 210/240. The compressor, with standard controls, shall be capable of operation down to 45º F outdoor tempera- ture. Accessory low ambient kit shall be available for opera- tion to 0º F.

ELECTRICAL REQUIREMENTS

All unit power wiring shall enter unit cabinet at a single factory provided location and be capable of side or bottom entry, to minimize roof penetrations and avoid unit field modifications. Separate side and bottom openings shall be provided for the control wiring.

Subject to change without notice. Printed in U.S.A.

 

292443-XTG-B-0807

Copyright © 2007 by Unitary Products Group. All rights reserved.

Supersedes: 292443-XTG-A-0207

 

 

 

Unitary

5005

Norman

Products

York

OK

Group

Drive

73069

Page 23 Page 24
Page 24
Image 24
York 292443-XTG-B-0807 manual Unit Cabinet
Page 23 Page 24

292443-XTG-B-0807 specifications

The York 292443-XTG-B-0807 is a sophisticated heating, ventilation, and air conditioning (HVAC) unit designed to offer optimal climate control for both residential and commercial applications. This model showcases a blend of cutting-edge technologies and robust features that ensure reliable performance and energy efficiency.

One of the standout characteristics of the York 292443-XTG-B-0807 is its high-efficiency compressor, which is engineered to deliver exceptional cooling and heating capabilities while minimizing energy consumption. This unit operates with a high Seasonal Energy Efficiency Ratio (SEER) rating, indicating its ability to provide effective cooling while reducing operational costs.

Additionally, this HVAC system is equipped with variable speed technology, allowing it to adjust the cooling output to match the specific demands of the environment. This not only enhances comfort but also contributes to significant energy savings. The unit operates quietly, adhering to modern residential standards for noise levels, making it ideal for use in living spaces without disturbing routines.

In terms of control, the York 292443-XTG-B-0807 features advanced programmable thermostats. These thermostats can be easily adjusted to create customized heating and cooling schedules, enhancing user convenience and energy management. Furthermore, remote monitoring capabilities enable users to manage and control the system via smart devices, providing greater flexibility and ease of access.

The construction of the unit ensures durability and longevity, utilizing corrosion-resistant materials that withstand various environmental conditions. This robust design not only extends the system’s lifespan but also reduces maintenance needs over time.

Efficiency is further bolstered by the integrated air filtration system, which captures particulates and allergens, significantly improving indoor air quality. By promoting cleaner air circulation, the York 292443-XTG-B-0807 effectively supports a healthier living environment.

In summary, the York 292443-XTG-B-0807 stands out as an advanced HVAC solution combining high efficiency, modern technology, and user-friendly features. Ideal for ensuring comfort and sustainability, this unit meets the needs of today’s energy-conscious consumers while delivering reliable climate control solutions.
Top Page Image Contents