TECHNICAL GUIDE GAS-FIRED RESIDENTIAL SINGLE STAGE MULTI-POSITION GAS FURNACES

STANDARD & Low NOx MODELS MODELS: TG8S / TGLS

NATURAL GAS

40 - 130 MBH INPUT

363657-YTG-C-0708

DESCRIPTION

These compact units employ induced combustion, reliable hot surface ignition and high heat transfer aluminized tubular heat exchangers. The units are factory shipped for installa- tion in upflow or horizontal applications and may be con- verted for downflow applications.

These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe depend- able and economical installation and operation.

These units are Category I listed and may be common vented with another gas appliance as allowed by the National Fuel Gas Code.

WARRANTY

20-year limited warranty on the heat exchanger.

10-year heat exchanger warranty on commercial applica- tions.

5-year limited parts warranty.

FEATURES

EFFICIENCY RATING CERTIFIED

ISO 9001

Certified Quality

Management System

Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary.

Compact, easy to install, ideal height 33" tall cabinet.

Blower-off delay for cooling SEER improvement.

Easy access to controls to connect power/control wiring.

Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation.

Low unit amp requirement for easy replacement application.

Single wire twinning or staging feature available.

All models are convertable to use propane (LP) gas.

Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.

100% shut off main gas valve for extra safety.

4 speed, direct drive PSC motor.

24V, 40 VA control transformer and blower relay supplied for add-on cooling.

Hi-tech tubular aluminized steel primary heat exchanger.

Timed on, adjustable off blower capability for maximum comfort.

Blower door safety switch.

Solid removable bottom panel allows easy conversion.

Low NOx models have been designed to meet specific code requirements.

Airflow leakage less than 1% of total airflow at ductblaster conditions.

Due to continuous product improvement, specifications are subject to change without notice.

Visit us on the web at www.york.com for the most up-to-date technical information.

Additional efficiency rating information can be found at www.gamanet.org.

No knockouts to deal with, making installation easier.

Movable duct connector flanges for application flexibility.

Quiet inducer operation.

Inducer rotates for easy conversion of venting options.

Fully supported blower assembly for easy access and removal of blower.

External air filters used for maximum flexibility in meeting customers IAQ needs.

Venting applications - may be installed as a common vent with other gas-fired appliances or use a masonry chimney.

1/4 turn knobs provided for easy door removal.

FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

Page 1
Image 1
York TGLS, TG8S warranty Description, Warranty, Features, 40 130 MBH Input

TGLS, TG8S specifications

The York TG8S and TGLS are two advanced commercial air conditioning units designed for high performance and efficiency, making them ideal for a variety of HVAC (heating, ventilation, and air conditioning) applications. These units exemplify York's commitment to delivering reliable and eco-friendly cooling solutions tailored to meet the diverse needs of modern buildings.

The York TG8S is known for its exceptional energy efficiency, achieving SEER (Seasonal Energy Efficiency Ratio) ratings that often exceed industry standards. This allows businesses to significantly reduce their energy consumption and operational costs while ensuring optimal indoor comfort. The unit features a robust design that can withstand harsh environmental conditions, making it suitable for both indoor and outdoor installations.

One of the standout features of the TG8S is its variable-speed compressor technology. This allows the system to adjust its cooling output based on the current demand, leading to improved temperature control and reduced energy usage. Additionally, the unit is equipped with advanced microprocessor controls that provide precise monitoring and customization of system performance, ensuring consistent comfort year-round.

On the other hand, the York TGLS series is specifically designed for larger commercial applications, such as office complexes and shopping centers. It is recognized for its modular design, which allows for easy installation and scalability. The TGLS units can be combined to create a system tailored to larger spaces, ensuring efficient temperature management throughout the entire facility.

Both the TG8S and TGLS units employ advanced refrigerants with low global warming potential (GWP), aligning with current environmental regulations and initiatives aimed at reducing climate impact. The units are built with durable materials that not only enhance longevity but also contribute to their resistance against corrosion and wear.

Another noteworthy characteristic is their remarkably low noise levels, ensuring a comfortable environment without disruptive sounds. This is particularly important for commercial settings where maintaining a pleasant atmosphere is essential for customers and employees alike.

In conclusion, the York TG8S and TGLS units represent the forefront of HVAC technology, combining energy efficiency, advanced control systems, and environmentally responsible features. Their ability to adapt to varying cooling needs makes them an excellent choice for businesses looking to invest in sustainable cooling solutions while enhancing overall comfort.