Yorkville Sound C120P dimensions Front LEDs, Controls and Connections, Additional, Top to bottom

Yorkville C120P Loudspeaker

Thank you for choosing Yorkville's Coliseum C120P powered monitors for your sound reproduction needs. We hope you will take the time to read this brief manual and if you have any questions we can be reached online at info@yorkville.com.

Powered

SPEAKER

Front LEDs

Blue LED - indicates power ON.

Orange LED - indicates "clip/limit." The built-in non-defeat- able LIMITER helps to prevent distortion. It operates continuously and has minimal effect on sound quality,

however its operation does indicate that the C120P is at maximum volume and may be on the verge of dis- tortion if the Orange LED is on more of the time than

simply flashing on peaks.

Controls and Connections

(top to bottom)

TREBLE Control - adjust this control clockwise or counter-clockwise to increase or decrease high frequency emphasis. A center setting is neutral. (See BASS control.)

C120PW a

8

t t s

BAL

ANCE

D

C120P

SECON

LINE

IN

C120PD

LINK OU

T

CD/ST

EREO

L

INE IN

WHEN

FOR MINI

K

LINE INEREO

LINK

CD/ST

TYPE:

-JAC

S

(1/8-

S(from LINK

YS1025

ING USE

OURCE C1o2f0

P)

ONLY

inch)

230V

STEREO

CABLES

50Hz

0.

15A

1v2

Yorkville

120

VAC

AVIS

60Hz

RISQUE

DE

CHOC

0.3A

ELECTRIQUE NE

WA

RISK

OF

PAS

OUVRIR

AVIS

RNING

DOELECTRIC

NOT OPENSHOCK

RISQUE DESHOCK

HAZARD DO

NOT SUIT CHOC

YOR

ABLE

ELECTRIQUE NOT

FOR

IN-W

NE

OPEN

TOROKVILLE

SOUND

ALL

PAS

OUVRIR

NTO,

WARNING:

CANADA

MOUNTING

LE

IS

THE

BONDING

MADE

IN CH

FABR

CONDUCTEURPROVIDED FOR

CO

IQUÉ EN CINHA

D'ALIMENTATION

DE

PERFONDUCTOR IN

INE

EST TERRE DE RMANCE THIS

SUPPLY

SEULEM

ENT PROTECTIONREASONS ONL CORD

POUR

DANS CE

Y

RAISONS DE

CORDON

PERFORMANCE

Gain

Treble

Bass

Balanced Line In

Link Out

Mono Stereo

CD/Stereo Line In

GAIN Control - turn this control clockwise to increase the volume, or counterclockwise to reduce volume. If the orange "clip/limit" LED on the front of the enclosure illuminates, reducing the GAIN setting will decrease its activity.

BASS Control - adjust this control clockwise or counter-clockwise to increase or decrease the emphasis in the low frequency region. A center setting is neutral.

Tip: if the orange "clip/limit" LED is illuminating overtly at comparatively low sound levels, it may be a result of the BASS being turned up too far. Reducing the BASS setting will help to compen- sate. This also applies to the TREBLE control.

¼-Inch BALANCED LINE Input - this is for monophon- ic, Tip-Ring-Sleeve (balanced), line-level signals and is not internally connected to the STEREO LINK OUTPUT. Its main purpose is to provide the mixing technician with the ability to isolate mixer outputs, or patches, through a dedicated monitor.

Balancing code is; Tip= (+) 0° phase, Ring= (-) 180° phase, and Sleeve=Ground.

Tip: if you want to add-on a second C120P, connect your signal source via the 1/8-inch CD STEREO LINE IN jack, not the ¼-inch BALANCED LINE input. Now you can interconnect the second C120P as stated below.)

MONO/STEREO Pushbutton - regulates the signal com- ing in through the 1/8-inch CD/STEREO LINE IN jack. Use the STEREO setting when the audio signal is stereo and/or interconnecting an additional C120P. Use the MONO setting when no other C120P is linked and you want Left and Right blended.

Tip: if you are adding another C120P via the STEREO LINK OUTPUT jack, be sure the MONO/ STEREO pushbutton is in the STEREO position so that the additional speaker will work

1/8-inch CD/STEREO LINE IN Jack - this is where you connect your stereo tuner/amplifier, CD player or tape deck. When used in the recording studio, you may run a mono line from the mixer to this input rather than the ¼- inch BALANCED LINE IN jack.

Additional

Your C120P can be painted. We suggest that you remove the front grill and mask off the speakers and rear connector panel to avoid getting paint on them. If you want to paint the C120P without removing the grill, a small amount of overspray will not hurt the components. However, too much paint will destroy your speakers permanently.

1/8-inch STEREO LINK OUTPUT Jack - use a 1/8-inch stereo cable here to connect an additional C120P. Make sure the MONO/STEREO button is in the STEREO posi- tion (down) otherwise the additional speaker will not work.

Frequency response: 65Hz to 19KHz +/-3dB

Power: 80 Watts burst avg. power

Max SPL: 101dB @ 1 meter

Connectors: 1/4-inch Phone and 1/8-inch Mini Jack Dimensions: W 17.8 x D 6.5 x H 10.25 inches

W 17.8cm x D 16.5cm x H 26cm Weight: 8.8 lbs (4.0 kg.)

*This Product is Warranted against manufacturing defects for a period of one year

w w w . y o r k v i l l e . c o m

China

Yorkville Sound	Yorkville Sound Inc.
550 Granite Court	4625 Witmer Industrial Estate
Pickering, Ontario	Niagara Falls, New York
L1W-3Y8 CANADA	14305 USA

Printed in

Quality and Innovation Since 1963

DOC-c120p-spec-00-2v0.pdf