MULTIPLE PS110P's
As well as accommodating the full-range speakers, the parallel input jacks allow many PS110P's to be connected in a string. There is no practical limit to the number of PS110P's that may be connected together.
Full Range | Full Range |
Cabinet | Cabinet |
Power Amplifier |
Amp In | Amp Out |
PS110P | PS110P |
figure 2
Full Range | Full Range |
Cabinet | Cabinet |
Amp In | Amp Out |
Power Amplifier | |
Output A | Output B |
Mixer/Pre Amp | |
PS110P | PS110P |
figure 3
USER NOTE
For normal operation connect the PS110P just like any ordinary speaker along with the full-range speakers. The input level switch should be set to speaker. If the audio source does not have a U ground (a ground pin on the AC cord), the ground lift switch must be set to gnd. The PS110P may be wired before or after the full-range speakers. The PS110P does not alter the signal to the full- range speakers. The PS110P will not draw any power from the amplifier driving the full-range speakers. Please note that an external crossover is not necessary.
