Yorkville Sound PS110P Specifications, Power Requirements, Power Amplifier, Performance, Limiting

Note: The PS110P built-in stand mounting adapter can be used with Yorkville

SW-Teletube accessory to support our E160 cabinets. The support tube can be adusted up

to it's full 5'4" extension safely as long as the PS110P is not inclined more than 10°.

WARNING: Larger/heavier cabinets should not be used with the stand mount!

Specifications

Power Requirements

North American: 117VAC 60 Hz

260 Watts Maximum

European: 230VAC 50 Hz

260 Watts Maximum

Power Amplifier

Power (Internal Amp): 200 Watts

Input Impedance: 80 kohms

Speaker

10"driver, 2-ohm, 200 Watts

Performance

Maximum SPL: 125 dB

Frequency response: 50 Hz to 110 Hz

Input Connections

Input: 1 x 1/4-inch, Output: 1 x 1/4-inch

Tip: Positive, Ring: Negative, Sleeve: Optional

Grounding

The sleeves of the input are not grounded except when the input ground switch is set to GND. Grounding is done through a 10-ohm protection device in order to prevent damage due to miswiring.

Limiting

Clipping, Average voice coil current, Thermal

Weight

53 lb. (24 kg)

Dimensions

(HxWxD): 14.0" x 17.5" x 27.1"

35.6 x 44.5 x 68.9 cm

3