ZALMAN CNPS7700 user manual Fan Mate 2 Installation and Usage, Fan Mate 2 Operation

③Install the L-Type Grip to both sides of the Clip and fasten Bolts through the holes of the Grips onto the Clip Support.

6. Fan Mate 2 Installation and Usage

1) Fan Mate 2 Installation

①Connect Fan Mate 2 between the Fan Cable and the motherboard as shown in the diagram below.

②Fan Mate 2 can be installed to the side of the case using Double-Sided Tape.

Double-Sided Tape

Fan Connector (Cooler)

2) Fan Mate 2 Operation

Adjust the Fan Speed Control Knob for RPM control.

Fan Speed Control Knob

BIOS Booting Error

In the case that you get a BIOS error beep:

①Rotate the Fan Speed Control Knob clockwise to the maximum setting.

② Disable CPU Fan Detected in BIOS setting or set the system monitoring program’s CPU Fan RPM to the lowest setting.

※Certain motherboards will not boot if the CPU fan’s RPM is not detected. In this case inquire to the motherboard’s manufacturer for additional details.

.COM 6