Avaya 6 manual Installing the Voicemail Pro Imap Server, Licensing IP Office for Web Services

Installing Voicemail Pro: UMS Web Services

Installing the Voicemail Pro IMAP Server

The IMAP server is installed as a standard part of the Voicemail Pro service installation. It uses the IP address of the Voicemail Pro server PC and runs on the standard IMAP port 143.

The only special consideration is to avoid having any other IMAP server running on the same PC.

Licensing IP Office for Web Services

UMS web services can be licensed in a number of ways by licenses added to the IP Office configuration:

∙User Licensing

User licensing is done as follows.

∙Users whose Profile is set to Teleworker User or Power User can be enabled to UMS if required. This requires Teleworker Profile or Power User Profile licenses.

∙User's whose Profile is set to Basic User can be licensed using legacy UMS Web Services licenses.

∙Hunt Group Licensing

Hunt groups are licensed by UMS Web Services licenses.

1.Start IP Office Manager.

2.Receive the configuration from the IP Office associated with the Voicemail Pro server.

3.In the Licenses section, add the required licenses.

4.Merge the configuration back to the IP Office and then receive the configuration again.

5.In the Licenses section check that the License Status of the licenses is now shown as Valid.

6.Start the Voicemail Pro client

7.Select Help About.

8.The screen should list the Web Services as Started and should show the number of UMS licenses.

Configure Users for UMS

1.Start IP Office Manager.

2.Receive the configuration from the IP Office system hosting the user.

3.Select User and then select the required user.

4.Set their Profile to either Teleworker or Power User.

5.Select the Voicemail tab. Enable UMS Web Services. Click OK.

6.Merge the configuration back to the IP Office.

Configuring Hunt Groups for UMS

Access to hunt group mailboxes using UMS is supported for Voicemail Pro 5.0+.

1.Start IP Office Manager.

2.Receive the configuration from the IP Office system hosting the hunt group.

3.Select the hunt group.

4.Click on the Voicemail tab.

5.Enable UMS Web Services. Click OK.

6.Merge the configuration back to the IP Office.

Voicemail Pro Installation and Maintenance	Page 39
IP Office Release 6	15-601063 Issue 22e (16 May 2010)