7.3 Dial by Name

The Dial by Name action allows callers to indicate the user or group that they require by dialing the name on their telephone keypad and then making a selection from the matches found.

To use this feature the caller must use a telephone with DTMF dialing and with ITU alphabet letter keys as shown here.

The main pre-requisites before a Dial by Name action can be used are:

1.User Names

The user names are set through the IP Office Manager. Either the user's Name or Full Name field can be used for Dial by Name. If the Full Name field is set then it takes precedence over the Name field.

·Changing Names

Voicemail Pro mailboxes are created to match existing user Name's. If a user Name is changed, Voicemail Pro will create a new mailbox to match the new Name. Therefore care must be taken to ensure that Name field entries are as accurate as possible when first setting up users. Using the Full Name field for Dial by Name is recommended as the Full Name entry can be changed without affecting the existing mailbox entries.

2.User Name Recordings

Each mailbox to be included by the Dial by Name action needs to have had a user name recorded. This can be done in two ways:

·Intuity Mailbox Mode

By default when the user first enters their mailbox, they will be asked to set their voicemail code password and then to record their name.

·IP Office Mailbox Mode

In this mode you need to set up a call flow that allows users to record their name. In this document we have included an example module that can be used for that purpose. The same module can also be used by Intuity mode mailbox systems to let users re-record their names. See Adding a Record Name Module 376 .

Voicemail Pro Installation and Maintenance

Page 374

IP Office Release 6

15-601063 Issue 22e (16 May 2010)

Page 374
Image 374
Avaya 6 manual Dial by Name