Voicemail Pro Installation and Maintenance Page 138
15-601063 Issue 22e (16 May 2010)IP Office Release 6
·File
This field is optional. If a file is specified here it is used for the alarm call. If no file is specified the
default alarm message ("This is an alarm call, please hang up") is used.
·Display Text
By default the alarm will display "Alarm" on the target if it is an Avaya display phone. This field can be
used to customize the text used.
The following additional settings are available with Voicemail Pro 6.0+.
·Ring Time: Default = 60 seconds. Range = 5 to 120 seconds.
This field set the length of ring time used for the alarm call if not answered.
·Retries: Default = 0 (Off). Range = 0 to 10.
This field can be used to specify how many times the alarm should be repeated if it is not answered and
cleared. When a value other than 0 is selected, the Interval option becomes available to specify the interval
between repeats.
·Interval: Default = None (Off).
If a number of retires is specified, this option can be used to select the number of minutes between repeated
alarm attempts until the alarm is cleared.
·Cancel Code: Default = Off.
When off, the alarm is cleared if the alarm call is answered. If on, a dialing code can be specified. If the correct
code is not dialed in response to an alarm, the alarm is not cleared and will repeat if retries have been
specified.
·Cancel Code: Default = * , Range = Up to 4 digits.
This field is used to enter the dialing required to clear the alarm call. The value * will match any dialing.