Avaya 6 manual Test Variable

4.9.4 Test Variable

For Voicemail Pro 4.2+, the Test Variable action has been added and replaces the previous Check Digits action. It allows calls to be routed based on matching the value of a call variable to a specified value.

Settings

1.Click the Conditions Actions icon and select Test Variable.

2.The General 176 , Entry Prompts 177 , Reporting 182 and Results 183 tabs are standard tabs available to all actions.

3.The following controls are available on the Specific tab:

∙Select the variable to Match

This drop-down list is used to select which Voicemail Pro call variable below.

∙Select the parameter(s) to test the variable against

157should be checked for a match, see

Select the types of values that should be checked for a match and if necessary entry the value. If several options are selected, the Voicemail Pro checks for a match starting from the top and working down until a match occurs.

∙Variable

Check for a match against the value of another selected call variable 157 . Type the required value directly

or use the browse button to select the text that should be used including using a the value of a call variable 157 .

∙Specific

Check for a match against the value entered in the adjacent field.

∙Extn

Check for a match against valid extensions on the IP Office.

∙Hunt Group

Check for a match against hunt group extension numbers.

∙Mailbox

Check for a match against mailboxes.

∙Timeout after

The timeout value is used only if $KEY is selected as the variable to match. In this case, if the Voicemail Pro will wait for the specified timeout period for the caller to dial a new value of $KEY. To enter a value without waiting for the timeout to expire the user can be prompted to enter a value and then press #.

Voicemail Pro Installation and Maintenance	Page 246
IP Office Release 6	15-601063 Issue 22e (16 May 2010)