
Voicemail Pro Actions: Miscellaneous Actions
4.9 Condition Actions
Condition Actions
These actions are used to create branches in the call routing according to whether a value is true or false.
∙
Test Condition Action 243
Test whether a condition is true or false.
∙
Set User Variable Action 244
Set a variable to a particular value.
∙
Test User Variable Action 245
Test the value of a variable.
∙
Test Variable Action 246
Check if user dialing matches set digits.
∙
Increment and Test Counter 249
Increment a $COUNTER variable and then test whether is matches a specified value.
∙
Decrement and Test Counter 248
Decrement a $COUNTER variable and then test whether is matches a specified value.
4.9.1 Test Condition
The Test Condition action allows the current state (True or False) of a condition setup through the Conditions Editor
160to be checked.
Settings
1.Click the
Conditions Actions icon and select
Test Condition.
2.The General 176 , Entry Prompts 177 , Reporting 182 and Results 183 tabs are standard tabs available to all actions.
3.In the Specific tab, complete the fields with relevant details.
∙Return the results of the following condition
Allows a selection to be made from the conditions currently setup.
Results
This action has the following results which can be connected to further actions:
∙True
This result connection is used by the call if the tested condition is currently true.
∙False
This result connection is used by the call if the tested condition is currently false.
For examples of the Test Condition action in a call flow, see:
∙Customizing a Hunt Group Call Flow
280.
∙User Defined Variables
155.
Voicemail Pro Installation and Maintenance | Page 243 |
IP Office Release 6 |