ZALMAN Socket 478 CPU Installation-AMD XP/Duron, Socket, Apply Thermal Grease, Fasten Nipples

2) Apply Thermal Grease CPU

Spread thermal grease thinly and evenly over the CPU.

3) Insert Hand screws Thermal Grease

Insert hand screws into the outer holes on the clip.

4) Fasten Hand screws Outer hole

Place the CPU block on the center of the CPU. Screw in both hand screws in an alternating fashion until they are completely tightened.

Clip

A-Type

Clip Support

Inner hole

B-Type Clip Support

9. Installation-AMD XP/Duron, Socket 462

1)Fasten Nipples

Position the backplate on the bottom of the mainboard under the CPU socket, then fasten the nipples as shown on the right.

* When installing the ZM-WB2 on an Athlon 64, the retention frame is not needed.

Nipple

Large Hole Main board

Washer

Backplate

7