The Control Panel
|
| Off |
|
|
|
|
|
|
|
Mini 30° | 95° | Cottons |
|
|
|
|
| ZWD 1262 W | |
Spin |
|
| 60° | 1200 |
| Prewash |
| Function | |
Drain |
|
| 900 |
|
|
|
| Drying | |
Softener |
|
| 50° |
|
|
|
| ||
|
| 700 |
| Quick |
| End cycle | |||
Rinses |
|
| 40° |
|
| ||||
|
| 500 |
| Extra rinse | Time |
| |||
Soak 30 |
|
| 30° |
|
| ||||
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
| ||
|
|
| Dry |
| Easy | 1/2 Load |
| Drying | Start/ |
Wool 30° |
|
| 60° | Spin | Iron | Autodry | Options | Time | Pause |
|
|
|
|
|
|
|
| ||
40° |
|
| 50° |
|
|
|
|
|
|
Delicates | 30° 40° | Dry 30° 40° | Synthetics |
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
1 | Detergent dispenser drawer | Attention! |
2 | Programme selector dial | If you turn the programme selector dial to another |
programme when the machine is working, a warning | ||
|
| message appears for 3 seconds on the display. |
The selector dial is divided into the following sections:
•Cottons
•Synthetics
•Delicates
•Wool (Handwash)
•Soak 30, Rinses, Softener, Drain, Spin and Mini 30°
•“O” Off = Reset/Switching the machine off
|
| Off |
|
Mini 30° | 95° | Cottons | |
Spin |
|
|
|
Drain |
|
| 60° |
Softener |
|
| 50° |
Rinses |
|
| 40° |
Soak 30 |
|
| 30° |
|
|
| Dry |
Wool 30° |
|
| 60° |
40° |
|
| 50° |
Delicates | 30° 40° | Dry 30° 40° | Synthetics |
The selector dial can be turned either clockwise or anticlockwise.
E- position corresponds to the ENERGY SAVING programme for cotton and position “O” Off to Reset programme/Switching off of the machine.
corresponds to a cold wash.
At the end of the programme the selector dial must be always turned to position “O” Off , to switch the machine off .
3 “Spin” button
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the 
“Rinse Hold” option. The relevant light will light up.
Maximum speeds are:
•for cottons: 1200 rpm
•for synthetics fabrics and Wool: 900 rpm;for
•for delicate fabrics and Mini 30°: 700 rpm.
“Rinse Hold” position: when you choose this option, the machine will not drain the water of the last rinse, so as not to crease the laundry.
At the end of the cycle, the light of the “Start/Pause” button goes out, the “End cycle” light illuminates but the door is locked to indicate that the water must be drained. A flashing zero appears on the display.
To complete the cycle, there are 2 possibilities:
•Select programme “Drain” and then depress the Start/Pause button: the water is emptied out without spinning.
•Select programme “Spin”. Select the spin speed by means of the relevant button and then depress the Start/Pause button. The water is emptied out and the laundry is spun at the selected spin speed.
6
